- RS-artikelnummer:
- 896-7273
- Tillverkare / varumärke:
- RS PRO
- RS-artikelnummer:
- 896-7273
- Tillverkare / varumärke:
- RS PRO
Lagstiftning och ursprungsland
- COO (Country of Origin):
- CN
Produktdetaljer
RS PRO Capacitive sensor - Block, PNP Output, 10 mm Detection, IP67, Cable Terminal
This RS PRO capacitive sensor is a proximity sensor you can use to detect metallic and non-metallic objects without physical contact. The sensor uses an electrical field to detect and measure materials that are conductive or have a greater dielectric constant than air.
This unit is made from polybutylene terephthalate (PBT) to ensure it's strong and resistant to chemicals and heat. It has an Ingress Protection (IP) rating of IP67, which means it's shielded against dust and temporary immersion in water. The sensor also features reverse polarity and short circuit overload protection, so you can be sure your equipment will be protected should something go wrong with the wiring.
This unit is made from polybutylene terephthalate (PBT) to ensure it's strong and resistant to chemicals and heat. It has an Ingress Protection (IP) rating of IP67, which means it's shielded against dust and temporary immersion in water. The sensor also features reverse polarity and short circuit overload protection, so you can be sure your equipment will be protected should something go wrong with the wiring.
Features and Benefits
Block body style
Detection range of 10 mm
Dimensions of 50 (length) x 20 (width) x 10 mm (depth)
PBT (Polybutylene Terephthalate) housing material
IP (Ingress Protection) rating of IP67
Maximum operating temperature of +55°C
Minimum operating temperature of -10°C
Non-flush mounting style
Output type of PNP (Positive Negative Positive)
Reverse polarity protection
Capacitive sensor technology
Shielded
Short circuit overload protection
Conforms to CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards
Supply voltage of 10 to 30 V DC
Switching current of 200 mA (milliamperes)
Switching frequency of 30 Hz
Cable terminal type
Detection range of 10 mm
Dimensions of 50 (length) x 20 (width) x 10 mm (depth)
PBT (Polybutylene Terephthalate) housing material
IP (Ingress Protection) rating of IP67
Maximum operating temperature of +55°C
Minimum operating temperature of -10°C
Non-flush mounting style
Output type of PNP (Positive Negative Positive)
Reverse polarity protection
Capacitive sensor technology
Shielded
Short circuit overload protection
Conforms to CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards
Supply voltage of 10 to 30 V DC
Switching current of 200 mA (milliamperes)
Switching frequency of 30 Hz
Cable terminal type
Specifikationer
Attribute | Value |
---|---|
Sensor Technology | Capacitive |
Body Style | Block |
Output Type | PNP |
Detection Range | 10 mm |
Terminal Type | Cable |
Supply Voltage | 10 → 30 V dc |
IP Rating | IP67 |
Length | 50mm |
Switching Frequency | 30 Hz |
Width | 20mm |
Depth | 10mm |
Maximum DC Voltage | 30V |
Switching Current | 200 mA |
Shielding | Shielded |
Maximum Operating Temperature | +55°C |
Housing Material | PBT |
Minimum Operating Temperature | -10°C |
Short Circuit Overload Protection | Yes |
Standards Met | CE, IEC |
Reverse Polarity Protection | Yes |