Microchip MCP2562T-E/SN, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin SOIC
- RS-artikelnummer:
- 177-3186
- Tillv. art.nr:
- MCP2562T-E/SN
- Tillverkare / varumärke:
- Microchip
Tillfälligt slut i lager – restorder för leverans när den finns i lager
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 10)
12,34 kr
(exkl. moms)
15,42 kr
(inkl. moms)
| Enheter | Per unit | Per Pack* |
| 10 - 20 | 12,34 kr | 123,40 kr |
| 30 + | 11,892 kr | 118,92 kr |
- RS-artikelnummer:
- 177-3186
- Tillv. art.nr:
- MCP2562T-E/SN
- Tillverkare / varumärke:
- Microchip
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- US
Produktdetaljer
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin
Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin
Specifikationer
Attribute | Value |
|---|---|
| Maximum Data Rate | 1Mbps |
| Number of Transceivers | 1 |
| IC Type | CAN Transceiver IC |
| Standard Supported | ISO 11898-2, ISO 11898-5 |
| Power Down Mode | Normal, Standby |
| Maximum Supply Current | 70 mA |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Pin Count | 8 |
| Dimensions | 4.9 x 3.9 x 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Height | 1.5mm |
| Maximum Operating Supply Voltage | 5.5 V |
| Minimum Operating Supply Voltage | 4.5 V |
| Maximum Operating Temperature | +125 °C |
| Automotive Standard | AEC-Q100 |
| Minimum Operating Temperature | -40 °C |