Microchip Technology MCP2561T-E/SN, CAN Transceiver 1Mbit/s 1-Channel, 8-Pin SOIC

  • RS-artikelnummer 177-3154
  • Tillv. art.nr MCP2561T-E/SN
  • Tillverkare / varumärke Microchip
Lagstiftning och ursprungsland
COO (Country of Origin): US

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin

Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are

Attribute Value
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 4.5 V
Automotive Standard AEC-Q100
Minimum Operating Temperature -40 °C
680 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 10)
7,186 kr
(exkl. moms)
8,982 kr
(inkl. moms)
Per unit
Per Pack*
10 - 20
7,186 kr
71,86 kr
30 +
6,897 kr
68,97 kr
Related Products
The LTC®2875 is a robust high speed, low ...
The LTC®2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has ...
The Microchip MCP2021 is a LIN Transceiver that ...
The Microchip MCP2021 is a LIN Transceiver that provides a bi-directional, half-duplex communication interface. Designed to provide a communications interface between a Microcontroller and a Local Interconnect Network (LIN) the MCP2021 complies to LIN 1.3, 2.1 and SAE J2602-2 specifications. ...
Controller Area Network (CAN or CAN-bus) is a ...
Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also ...
The Microchip Technology MCP23X17 family is a 28-pin, ...
The Microchip Technology MCP23X17 family is a 28-pin, 16-channel, surface mount SOIC package general purpose parallel I/O expander. It has an electric rating ranging between 1.8V and 5.5V. It consists of multiple 8-bit configuration registers for input, output and polarity ...