Microchip MCP2562-H/MF, CAN Transceiver 1Mbit/s 1-Channel ISO 11898-2, ISO 11898-5, 8-Pin DFN

  • RS-artikelnummer 177-1633
  • Tillv. art.nr MCP2562-H/MF
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specifikationer
Attribute Value
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported ISO 11898-2, ISO 11898-5
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type DFN
Pin Count 8
Dimensions 3 x 3 x 0.95mm
Length 3mm
Width 3mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
Automotive Standard AEC-Q100
360 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tube of 120)
6,624 kr
(exkl. moms)
8,28 kr
(inkl. moms)
Enheter
Per unit
Per Tube*
120 +
6,624 kr
794,88 kr
Related Products
The SY89540U is a low-jitter, low skew, high-speed ...
Description:
The SY89540U is a low-jitter, low skew, high-speed 4x4 crosspoint switch optimized for precision telecom and enterprise server/storage distribution applications. The SY89540U guarantees data-rates up to 3.2Gbps over temperature and voltage. The SY89540U differential input includes Micrel's unique, 3-pin input ...
The FT81x series of Embedded Video Engines offers ...
Description:
The FT81x series of Embedded Video Engines offers the designer improved performance over the FT80x series with new features, while retaining pin compatibility. The FT81x provides graphics control, audio control and a touch screen interface. The built-in graphics operations allow ...
The i.MX28x is a high-performance ARM9-core 32-bit microcontroller ...
Description:
The i.MX28x is a high-performance ARM9-core 32-bit microcontroller optimized for embedded multimedia applications. It is available in consumer, industrial and automotive grades. The automotive grade parts have the additional benefit of being AEC-Q100 qualified. 454MHz ARM926EJ-S core with 128KB Mask-PROM, ...
Description:
A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or ...