Legrand Heavy Duty Tray, Hot Dip Galvanised Steel 3m x 75 mm x 50mm

  • RS-artikelnummer 123-614
  • Tillv. art.nr SRFL/75/G
  • Tillverkare / varumärke Legrand
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Heavy Duty Tray

This heavy duty swifts cable tray systems features a distinctive slot pattern which provides installers with total flexibility for the positioning of nuts and bolts, cable ties and all auxiliary items. This heavy duty flange steel cable tray is finished in a hot dip galvanised coating for extra protection.

Tray depth: 50mm
Finish: hot dip galvanised

Approvals

BS729

Specifikationer
Attribute Value
Tray/Basket Type Heavy Duty Tray
Length 3m
Width 75 mm
Depth 50mm
Material Hot Dip Galvanised Steel
Series Swifts
172 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 4)
458,088 kr
(exkl. moms)
572,61 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
4 - 36
458,088 kr
1 832,352 kr
40 +
429,395 kr
1 717,58 kr
Related Products
BS4568 Part 2 product finish classification.,Class 2 - ...
Description:
BS4568 Part 2 product finish classification.,Class 2 - Black enamelled inside and outside.,Class 3 - Pre-galvanised sheet steel.,Class 4 - Hot dipped galvanised inside and outside. Black enamel or galvanised pressed steel light pattern lids and a black solid neoprene ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...