Legrand Trapeze Hanger Stainless Steel Support Rail, 50 mm Width

  • RS-artikelnummer 163-3087
  • Tillv. art.nr LTH50S
  • Tillverkare / varumärke Legrand
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the table

Specifikationer
Attribute Value
Accessory Type Trapeze Hanger
Material Stainless Steel
Tray and Basket Type Cable Tray
Series LTH
Duty Type Heavy Duty, Light Duty, Medium Duty
For Use With M10 Threaded Rod
Corrosion Protection Type Stainless Steel
Width 50 mm
7 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
63,42 kr
(exkl. moms)
79,28 kr
(inkl. moms)
Enheter
Per unit
1 - 9
63,42 kr
10 +
57,12 kr
Related Products
75 mm (852-520) or 150 mm (852-536) width1mm ...
Description:
75 mm (852-520) or 150 mm (852-536) width1mm thick 316 stainless steel M6 x 12 bolts and nuts available in bags of 100.
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 300mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...