Legrand Cantilever Arm Bracket Stainless Steel Cable Tray Fixing Plate, 50 mm Width, 65mm Depth

  • RS-artikelnummer 163-3075
  • Tillv. art.nr LCA50S
  • Tillverkare / varumärke Legrand
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifikationer
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Stainless Steel
Width 50 mm
For Use With Flat Surface Tray, Swiftrack Channel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 65mm
Series LCA
Corrosion Protection Type Stainless Steel
Tray and Basket Type Cable Tray
44 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
135,76 kr
(exkl. moms)
169,70 kr
(inkl. moms)
Enheter
Per unit
1 - 9
135,76 kr
10 +
122,26 kr
Related Products
Basic plated steel discs, designed to complement the ...
Description:
Basic plated steel discs, designed to complement the RS Energise to Release and Energise to Hold magnets. 739-3264 = 25mm Dia739-3211 = 30mm Dia739-3255 = 40mm Dia739-3251 = 50mm Dia739-3217 = 65mm Dia739-3214 = 80mm Dia.
PVC cantilever support arms for PVC condiut. Easy ...
Description:
PVC cantilever support arms for PVC condiut. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage areas, car parks ...
Pre-galvanised medium duty couplersCouplers are required for joining ...
Description:
Pre-galvanised medium duty couplersCouplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.
A range of enclosures designed for housing DIN ...
Description:
A range of enclosures designed for housing DIN rail terminals, made from 1.5mm sheet steel. These terminal boxes now have a new double lip edge to ensure higher strength and ease of installation for the panel builder / end user. ...