Legrand Cantilever Arm Bracket Hot Dip Galvanised Steel Cable Tray Fixing Plate, 100 mm Width, 74mm Depth

  • RS-artikelnummer 163-3073
  • Tillv. art.nr LCA100G
  • Tillverkare / varumärke Legrand
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifikationer
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Hot Dip Galvanised Steel
Tray and Basket Type Cable Tray
Width 100 mm
For Use With Flat Surface Tray, Swiftrack Channel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 74mm
Series LCA
Tillfälligt slut i lager – restorder för leverans 2020-02-19
Pris (ex. moms) Each
94,44 kr
(exkl. moms)
118,05 kr
(inkl. moms)
Enheter
Per unit
1 - 9
94,44 kr
10 +
84,95 kr
Related Products
PVC cable tray covers available in lengths of ...
Description:
PVC cable tray covers available in lengths of 3 metres. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage ...
PVC cantilever support arms for PVC condiut. Easy ...
Description:
PVC cantilever support arms for PVC condiut. Easy to installEco-friendly: PVC is 100% recyclableCan be installed inside and outsideSuitable for use in chemical or petrochemical industries, paper or food processingSuitable for use in commercial environments like storage areas, car parks ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...