Legrand Light Duty 90° Flat Bend Stainless Steel Cable Tray, 75 mm Width, 12mm Depth

  • RS-artikelnummer 852-520
  • Tillverkare / varumärke Legrand
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Stainless Steel 90° Bend

75 mm (852-520) or 150 mm (852-536) width
1mm thick 316 stainless steel
M6 x 12 bolts and nuts available in bags of 100

Approvals

-

Specifikationer
Attribute Value
Accessory Type Light Duty 90° Flat Bend
Material Stainless Steel
Width 75 mm
Depth 12mm
Series Swifts
24 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
190,945 kr
(exkl. moms)
238,681 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
2 - 18
190,945 kr
381,89 kr
20 +
171,865 kr
343,73 kr
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
Pre-galvanised medium duty couplersCouplers are required for joining ...
Description:
Pre-galvanised medium duty couplersCouplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drillingMRFC standard couplers are supplied in pairsMRFC standard coupler is supplied singly.