Lapp ATEX M32 Plug, Nickel Plated Brass, Threaded, IP68
Lagt till varukorgen
- Tillv. art.nr:
- Tillverkare / varumärke:
- COO (Country of Origin):
|Påse(ar)||Per Bag||Per unit*|
|1 - 4||444,21 kr||88,842 kr|
|5 - 9||422,00 kr||84,40 kr|
|10 +||399,78 kr||79,956 kr|
Skintop ATEX (Ex) Nickel Plated Brass Blanking Plugs - Metric
From Lapp, Skindicht BL-M ATEX blanking plug is used to close over pre-drilled threaded bore holes. If a cable opening in a panel, junction box or machine housing has become redundant, these blanking plugs can be used to seal the bore hole thread in accordance with EN 50262.
Complete with an o-ring, and with a robust nickel plated brass construction, these blind plugs have an excellent degree of environmental and mechanical impact protection. Not only that but they are ATEX approved, which means they are designed for use in environments where there is a risk of explosion.
Features and Benefits
Cold Impact Resistance
IP68 Protection to 5 Bar
Operating Temperature Range -30°C to +90°C
These blind plugs are ATEX approved to Equipment Group II / Category 2G+1D, and are often used in the following applications:
Offshore and Marine Industries
Chemical and Petrochemical Industries
These blind plugs provide protection up to IP68, which means they have excellent protection against dust and particle ingress, and are watertight even in submersion up to 10 bars of pressure. This means they are suitable for use in harsh indoor environments, and for most outdoor applications.
Lapp provide a handy cable gland wrench set to assist in cable gland removal.
458-3947 is a Spanner set for M12, M16, M20, M32 and M40 glands
Group and Category
IBExU 03 ATEX 1011
|Material||Nickel Plated Brass|
|Minimum Operating Temperature||-30°C|
|Maximum Operating Temperature||+90°C|
|Hazardous Area Certification||ATEX|