Lapp PG13.5 Plug, Nickel Plated Brass, Threaded, IP54
Lagt till varukorgen
- Tillv. art.nr:
- Tillverkare / varumärke:
- COO (Country of Origin):
|Enheter||Per unit||Per Pack*|
|5 - 20||15,924 kr||79,62 kr|
|25 - 45||15,142 kr||75,71 kr|
|50 +||14,318 kr||71,59 kr|
Lapp Brass Blanking Plug - PG
From Lapp, these blanking plugs are used to close over pre-drilled threaded bore holes. If a cable opening in a panel, junction box or machine housing has become redundant, these blanking plugs can be used to seal the bore hole, and have a simple screw-on action.
They feature a robust nickel plated brass construction, and have a good degree of resistance against corrosion and temperature for a low-maintenance cable management solution.
Ensuring a low level of environmental resistance (or higher when coupled with an o-ring) these blind plugs have far more use than the merely aesthetic, and can help protect wiring and machinery components.
Features and Benefits
Nickel-plated Brass Construction
IP54 Protection (IP68 when used with appropriate o-ring)
These blind plugs can be used in;
Electric Motor Manufacturing
These blind plugs can be used with corresponding Lapp o-rings for added environmental sealing.
664-4609 are M 12 x 1.5mm O-Rings
664-4606 are M 12 x 2.0mm O-Rings
664-4603 are M 16 x 1.5mm O-Rings
664-4612 are M 16 x 2.0mm O-Rings
664-4619 are M 20 x 1.5mm O-Rings
664-4615 are M 20 x 2.0mm O-Rings
664-4628 are M 25 x 2.0mm O-Rings
664-4621 are M 32 x 2.0mm O-Rings
664-4625 are M 40 x 2.0mm O-Rings
664-4634 are M 50 x 2.0mm O-Rings
|Material||Nickel Plated Brass|
|Minimum Operating Temperature||-60°C|
|Maximum Operating Temperature||+200°C|