Schneider Electric, DZ5CE Insulated Crimp Bootlace Ferrule, 8.2mm Pin Length, 1.4mm Pin Diameter, 0.5mm² Wire Size,
Lagt till varukorgen
- Tillv. art.nr:
- Tillverkare / varumärke:
- Schneider Electric
- COO (Country of Origin):
|Enheter||Per unit||Per Box*|
|100 - 400||0,46 kr||46,00 kr|
|500 - 2400||0,393 kr||39,30 kr|
|2500 - 4900||0,332 kr||33,20 kr|
|5000 - 9900||0,315 kr||31,50 kr|
|10000 +||0,302 kr||30,20 kr|
Schneider Electric Cable Ends
Schneider Electrics cable ends are commonly referred to as a crimp bootlace ferrule, they are comprised of tin-plated copper tubes that have been crimped (compressed for joining) over a standard wire to accomplish a reliable connection. This range of bootlace ferrules features a variety that has a colour coded insulation collar, this helps to protect the connection from contacts.
Facilitates introduction unto the terminals
Ends are packaged in small boxes of 100 pieces.
Any bootlace ferrule that is colour coded allows the user to easily identify and access them
What is a Bootlace Ferrule?
These bootlace ferrules are moulded with a colour-coded insulating collar which is made up of plastic. The ferrule is slipped over the end of a multi-stranded wire or cable, crimped and then inserted into a screw or spring clamp connection. When a multi-stranded wire has been stripped and placed under a screw terminal, the strands of wire will naturally fan out due to the pressure of the screw, with some of the strands going completely astray - this dramatically reduces the quality of an electrical connection, it could also result in an electrical short. This is when a bootlace ferrule comes in to play, their flared design and insulated funnel restricts all the fanned-out strands. Once a bootlace ferrule has been applied, it is then crimped together with a crimp tool and inserted into a terminal to create the electrical connection.
|Maximum Wire Size mm²||0.5mm²|
|Number of Entries||1|
|Maximum Wire Size AWG||22AWG|