Cypress Semiconductor, CYBLE-012011-00

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

CYBLE-01201x-x0 EZ-BLE Bluetooth Module

The CYBLE-01201x-x0 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. Two versions are available: one fully qualified and certified and an uncertified module without a screening can for initial lab development only. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CYBL10 48MHz Cortex-M0 core PRoC with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -87dBm
OTA Data Rate: 1Mbps
Up to 23 x GPIO
Up to 22 x capacitive sensors for buttons or sliders with liquid tolerance
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
Programmable low voltage detect (LVD) from +1.8 to +4.5Vdc
I²S master interface
PCB antenna
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Switches between Central and Peripheral roles on-the-go
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 14.52 x 19.20mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

RS Product Codes
124-4406 CYBLE-012011-00 PRoC EZ-BLE Radio Module, fully certified
124-4407 CYBLE-012012-10 PRoC EZ-BLE Radio Module, uncertified

Note

An evaluation board is available under RS Part No. 124-4197.

Approvals

CE, FCC, IC, MIC, KC (CYBLE-012011-00 only)

Specifikationer
Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces I2C, SPI, UART
Dimensions 14.52 x 19.2 x 2mm
Height 2mm
Length 14.52mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 19.2mm
Tillfälligt slut i lager – restorder för leverans 2021-01-13
Pris (ex. moms) Each (On a Reel of 1000)
59,568 kr
(exkl. moms)
74,46 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
1000 +
59,568 kr
59 568,00 kr
Related Products
Two PAN1760A USB-Evaluation Sticks packed in a small ...
Description:
Two PAN1760A USB-Evaluation Sticks packed in a small case. The stick has a USB to UART converter and allows hardware access to the module pins.
The Cypress semiconductor Bluetooth evaluation board is a ...
Description:
The Cypress semiconductor Bluetooth evaluation board is a device that enables you to evaluate and develop single-chip Bluetooth applications using the CYW20706 device. It is single-chip Bluetooth 4.2 compliant, stand-alone baseband processor with an integrated 2.4GHz transceiver. The kit is ...
BLE113-A-M256K is the BLE113 with an integrated chip ...
Description:
BLE113-A-M256K is the BLE113 with an integrated chip antenna and 256k flash memory.The Bluegiga BLE113 is a Bluetooth Low Energy Smart module designed for low power sensors and accessories. The Bluetooth module incorporates all essential features for a Bluetooth Smart ...
Bluetooth® Version: 5.0 (2Mbps mode)Frequency: 2402 to 2480 ...
Description:
Bluetooth® Version: 5.0 (2Mbps mode)Frequency: 2402 to 2480 MHzOutput power: +4dBm typ.Single power supply: 1.7 - 3.6VSingle Mode Bluetooth® low energyIntegrated System ClockIntegrated high performance pattern antennaARM Cortex M4F 32bit processor and 512KB flash and 64KB RAMInterface: SPI, UART, I2C, ...