2 Bolt Pillow Block Medium Series – Metric

Atlas

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals ...

These bearings are designed to accommodate shaft deflection

35mm Self Aligning Ball Bearing 72mm O.D

A range of ball bearings which are fitted with two synthetic rubber seals to prevent leakage of lubricant as well as entry of dust, water and other harmful material. Accepts radial and axial loads2RS denotes bearing fitted with 2 synthetic ...

A range of ball bearings which are fitted

35mm Deep Groove Ball Bearing 72mm O.D

NSK&#146;s range of thrust bearings are suitable for unidirectional axial loads. Supplied as three-part assemblies, these thrust bearings comprise of two grooved outer raceways and a caged ball set. These bearings are not suitable for radial loads. Trying to apply ...

NSK&#146;s range of thrust bearings are suitable for

35mm Thrust Ball Bearing 52mm O.D

These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces. ...

These flanged housing units have four bolts and

Enheter	Per unit
1 - 4	280,45 kr
5 - 9	274,84 kr
10 +	269,23 kr

Attribute	Value
Inside Diameter	35mm
Material	Cast Iron
Centre Height	54mm
Mount Hole Size	17 mm
Length	203mm
Depth	49.2mm
Overall Height	105mm
Mount Hole Centre-to-Centre	144mm

Pillow Block Bearing 35mm ID

Two-Bolt Pillow Block - Medium Duty

<B>Two-Bolt Medium Duty Pillow Block Application</B>

Pillow Block Bearing 35mm ID

Two-Bolt Pillow Block - Medium Duty

<B>Two-Bolt Medium Duty Pillow Block Application</B>

Related Products

Related Items

Related Categories