Plummer Block House SE 512-610, 55mm ID

  • RS-artikelnummer 506-741
  • Tillv. art.nr SE 512-610
  • Tillverkare / varumärke SKF
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): SE
Produktdetaljer

SNL Plummer Block Housed Units

The main benefit of split plummer block housings is their easy installation; pre-assembled shafts can be mounted in them. SNL Plummer blocks are primarily intended for self-aligning ball bearings, spherical roller bearings and CARB bearings.

Stiff Design - Insensitive to uncontrolled tightening of the attachment bolts and low operating temperatures
Excellent Heat Conduction - The extra ribs in the housing base provide additional surface area between the base and the base plate to improve heat flow away from the bearing, affording low bearing temperatures, high speed operation possible with oil lubrication, long relubrication intervals, long service life, low lubricant consumption
Additional Seals - Various sealing options are available for the plummer block housing

//media.rs-online.com/t_line/L0506729-01.gif

Plummer Blocks, Bearing Lubrication and Accessories

Specifikationer
Attribute Value
Inside Diameter 55mm
Material Cast Iron
Centre Height 70mm
Mount Hole Size 16 mm
Length 255mm
Depth 105mm
Overall Height 134mm
Mount Hole Centre-to-Centre 210mm
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 156,01 kr
(exkl. moms)
1 445,01 kr
(inkl. moms)
Enheter
Per unit
1 - 4
1 156,01 kr
5 - 9
1 120,34 kr
10 +
1 083,84 kr
Related Products
The bearing seating in the housing is sufficiently ...
Description:
The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axiallyBearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing insertsQuick fit/dismantle.
Plummer block housing units have a long or ...
Description:
Plummer block housing units have a long or a short base. Housings with a long base are screw mounted to the adjacent construction by slots, housings with a short base by blind threaded holes. Due to the spherical outside surface ...
cast iron housing, with long base, radial insert ...
Description:
cast iron housing, with long base, radial insert ball bearing with grub screws in inner ring, RSR seals.