4 Hole Flanged Bearing, PSF20CR, 20mm ID

  • RS-artikelnummer 232-8653
  • Tillv. art.nr PSF20CR
  • Tillverkare / varumärke NSK-RHP
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

Corrosion Proof, Self-Lube Bearing

Designed specifically for use in industries where frequent thorough wash downs are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range.

Capable of accommodating initial misalignment whilst mounting
Re-lubrication is possible through the grease nipple and all units are charged with USDA H1 approved food grade grease as standard

Four-Bolt Flange Bearings - NSK

Specifikationer
Attribute Value
Material Stainless Steel
Inside Diameter 20mm
Length 86.5mm
Width 86.5mm
Depth 36.3mm
Number of Mount Holes 4
Mount Hole Size M10
Mount Hole Centre-to-Centre 63.5mm
11 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
522,35 kr
(exkl. moms)
652,94 kr
(inkl. moms)
Enheter
Per unit
1 - 4
522,35 kr
5 - 9
506,33 kr
10 +
489,90 kr
Related Products
These flanged housing units have four bolts and ...
Description:
These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces. ...
These very low height plain bearings can be ...
Description:
These very low height plain bearings can be used with rotating, oscillating and axial movements. They are maintenance free and abrasion, temperature and corrosion resistant. E10 tolerance on inside diameter (measured with plug gauge)Fit into a H7 bore for high ...
Sealed bearing units to suit metric & imperial ...
Description:
Sealed bearing units to suit metric & imperial shafts. Made from cast iron to BS1452Spherical bearing insert accommodates initial misalignmentNitrile/fabric seals.
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing insertsSizes 12 to 25mm & 5/8 in to 1in IDQuick fit/dismantle2-bolt & 3-bolt versions available in Metric or Imperial sizes.