Oregon Scientific Barometer & Weather Station Temperature & Humidity Sensor

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

Oregon Scientific Remote Thermo Hygro Sensor THGR810

The Oregon Scientific THGR810 thermometer and humidity sensor (96 x 60 x 20 mm) has 10 Channels and is compatible with the WMR80, WMR88, WMR90A , WMR100, WMR200 & LW302U . It allows weather station owners/users to expand the locations and information monitored. The THGR810 sensor monitors both temperature and humidity readings and features an on- board LCD screen.

RF frequency 433MHz
Compatible with Oregon Scientific wireless weather stations
10 Channels
Transmission range up to 100m (330ft) unobstructed
Outdoor temperature range -30° C (-22° F) to 60° C (140° F)
Wall mount or table stand
Requires 2x UM-4 (AAA) 1.5V batteries (not included)

Note

For longer life and use in colder climates, the supplier recommends Lithium batteries. Standard Alkaline batteries contain significant amounts of water. Because of this they will freeze in low temperatures of approximately -12° C (10° F). Consumer grade Lithium batteries have a much lower threshold for temperature with an estimated freezing range of below -30° C (-22° F).

Specifikationer
Attribute Value
Accessory Type Temperature & Humidity Sensor
For Use With WMR100 Weather Station, WMR200 Weather Station, WMR90 Weather Station
Denna produkt har utgått
Relaterte Produkter
Desk standing thermometer with radio control clockDisplays indoor ...
Description:
Desk standing thermometer with radio control clockDisplays indoor and outdoor temperature Beep alarm with snooze function Detachable solar panel for recharging the batteryLED indicator light to show the battery levelRadio-controlled clock / calendar with manual override.
Environment click measures temperature, relative humidity, pressure and ...
Description:
Environment click measures temperature, relative humidity, pressure and VOC (Volatile Organic compounds gases). The click carries the BME680 environmental sensor from Bosch. Environment click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over ...
The SF2 filter cap, from Sensirion, has been ...
Description:
The SF2 filter cap, from Sensirion, has been designed to protect the SHT2x series of digital humidity & temperature sensors. The filter cap protects them from particle contamination, dust, water immersion and consequent condensation when being mounted. Composed of PBT ...
The KTY series of silicon PTC thermistors from ...
Description:
The KTY series of silicon PTC thermistors from NXP Semiconductors are ideal for use as temperature sensing devices in measurement and control systems. Whilst non-linear, they exhibit highly repeatable, predictable and stable resistance versus temperature characteristics. The KTY sensors have ...