OS standard 1NC auxiliary contact

  • RS-artikelnummer 512-9516
  • Tillv. art.nr OA3G01
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

Auxiliary Contacts

Auxillary contact blocks may be fitted to 'OS Fused Switched Disconnectors' to provide additional contacts for monitoring and test purposes.

OS Mini types can only be used with the 'OS Mini Fused Switch Disconnectors', they are located either above or below the switch mechanism
The Standard types can be used with all 'OS Fused Switch Disconnectors'
Snap fitting
Available as 1N/O or 1N/C contacts with test function
Test function enables testing without closing the main contacts

ABB OS Range

A fused switch disconnector provides a cost effective means of short circuit protection, together with circuit isolation. The choice of fuse rating determines the level of protection, the maximum value is determined by the fused switch disconnector. These items have been tested in accordance with EN 60947-3.

24 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
61,05 kr
(exkl. moms)
76,31 kr
(inkl. moms)
Enheter
Per unit
1 - 9
61,05 kr
10 - 14
58,63 kr
15 +
56,12 kr
Related Products
The Automatic Recloser Auxiliary (ARA) performs automatic reclosing ...
Description:
The Automatic Recloser Auxiliary (ARA) performs automatic reclosing of the associated protection device after tripping, avoiding service interruptions.This range of Acti9 ARA auto reclosers increase the availability of installations without supervision, isolated, hard of access and demanding very great ...
Siemens range of auxiliary contact bloacks to suit ...
Description:
Siemens range of auxiliary contact bloacks to suit the 3RH contactors. Front mounting positionCurrent rating; 6AAccepts cables up to 2 x 2.5mm21 x block per contactor, 1 x block per relay.
The Mettec Type A case consists of an ...
Description:
The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...