Flush Auxiliary Contact, NO/NC

  • RS-artikelnummer 239-5215
  • Tillv. art.nr 7699.0000.9
  • Tillverkare / varumärke Kopp
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Circuit breaker, universal auxiliary switch

This auxiliary switch can be adjusted for use as an auxiliary or signal switch MCB, RCD and RCB with a potential-free NC / NO or NC / changeover contact. Left flush mounting on MCB, RCD or RCB, 230 V.

Approvals

ÖVE, SEV

Automatic Cut-out, Green Electric Series

Innovative technology

The inner life of the KOPP MCB has changed significantly compared with previous automatic cut-out technology. The thermal actuator consists of a bimetal snap disc that is integrated into the magnetic actuator. This has reduced the number of welded connections in the device. The result: Less power dissipation and thus less device intrinsic heating.

Convenient mounting
The easy mounting of KOPP MCB is hugely appealing. With the new quick attachment, users can mount the MCB to the top hat rail from above, slide it to align and then lock with a hand grip. Immediately the MCB is securely seated, firm and straight. And the bonus: The MCB can also be quickly removed if needed, even from the mounting assembly.

Perfect connection technology
The MCB also provides optimal mounting convenience when connecting devices. The new design of the terminals has made connection even simpler. They are at the same height on the access and exit side. They have combi-slotted screws and permit simultaneous connection of wiring rails and single cores with cross-sections of 1.0 → 25 mm2.

Maximum reliability
The KOPP MCB offers reliable identification of the cause of the shutdown at first glance. If the green, sealable switch knob is in the new additional reset position, a shutdown occurred due to an overload or short-circuit. However, if it is in the "OFF" position, the shutdown was manual. Independent of the switch knob position, the optical switch position indicator (which is also new) displays the switch state of the device.

Specifikationer
Attribute Value
Number of Contacts 1
Normal State Configuration NO/NC
Mounting Style Flush
Pole and Throw Configuration SP
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
121,91 kr
(exkl. moms)
152,39 kr
(inkl. moms)
Enheter
Per unit
1 - 9
121,91 kr
10 - 14
117,10 kr
15 +
111,86 kr
Nästa dag-leverans inte möjlig
Related Products
316L stainless steel 1.2mm thick enclosures with RA104 ...
Description:
316L stainless steel 1.2mm thick enclosures with RA104 3.5mm gasket, protected to IP65External fixing lugsM5 self-retaining A4 stainless steel fixing screws.
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. 80A, 100A and 125A switches have a terminal cover includedHigh visibility handle padlockable (x4) in "OFF" positionInterlocked in "ON" position ...
Are you looking to provide an additional auxiliary ...
Description:
Are you looking to provide an additional auxiliary contact to your control circuit, to provide further safety? Schneider Electric offers the latest in Auxiliary Contact components and technology.Specifically, the LA1K series of Auxiliary Contactor brings reliability to your circuit by ...
Siemens range of auxiliary contact bloacks to suit ...
Description:
Siemens range of auxiliary contact bloacks to suit the 3RH contactors. Front mounting positionCurrent rating; 6AAccepts cables up to 2 x 2.5mm21 x block per contactor, 1 x block per relay.