Advance Tapes AT521 Conductive Aluminium Tape 0.07mm, W.25mm, L.33m

Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): IE
Produktdetaljer

AT521 40μ EMI/RFI Conductive Tape

The Advance Tapes AT521 40 μ aluminium foil shielding tape has been designed to provide you with good shielding and conductivity through its removable silicone liner.
The foil tapes are easy to unwind, easy to use and are aesthetically pleasing.

Features and Benefits

Good chemical, heat, acid and alkali resistance
Good resistance to high and low temperatures
The foil construction is tested in-house and conforms to the flame retardant requirement part only of UL510
Tested in accordance with ASTM D-1000 latest issue, BS EN 60454 - Part 2
test methods (Formerly VDE 0340,BS 3924).
Tested and meets military specification MIL – T – 47012

Typical Applications

Use the AT521 tape for your EMI/RFI and static shielding

Note

Always think about the galvanic compatibility before using the AT521 tapes.
Refer to the datasheet for more information on the tapes.

Advance Tapes Aluminium Tape

The Advance Tapes conductive aluminium shielding tape is a 40μm foil, coated with an electrically conductive acrylic adhesive supplied on a removable silicone liner. This tape is 0.07mm thick, 25mm wide and 33m long. Note: Always think about the galvanic compatibility before using the AT521 tapes.EMI/RFI shielding tapes: The galvanic compatibility should be taken into account while using these tapes.

Features and Benefits

Breaking load is 25N/cm Adhesion to steel is 4.5N/cm Elongation is 8% Operating temperature ranges between -20°C and 155°C Good shielding effectiveness and z-axis conductivity Good high and low-temperature resistance Good resistance to chemical, heat, acid, and alkali Easy unwind, easy to use, and aesthetically pleasing

Applications

Use the AT521 tape for your EMI/RFI and static shielding Heating and ventilation Construction industry Manufacturing Duct sealing

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Specifikationer
Attribute Value
Total Thickness 0.07mm
Foil Thickness 0.04mm
Width 25mm
Length 33m
Adhesion Strength 4.5 N/cm
Adhesive Material Acrylic
Tensile Strength 25N/cm
Conductivity Conductive
Maximum Temperature Resistance +155°C
Minimum Temperature Resistance -20°C
Complies with EN Legislation BS EN 60454 - Part 2
Model Number AT521
Tillfälligt slut i lager – restorder för leverans 2020-02-05
Pris (ex. moms) Each
20,598 kr
(exkl. moms)
25,748 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
33 - 165
20,598 kr
679,734 kr
198 - 462
19,778 kr
652,674 kr
495 +
19,364 kr
639,012 kr
Related Products
When using these tapes galvanic compatibility should be ...
Description:
When using these tapes galvanic compatibility should be taken into account. Conductive flexible aluminim coated foilConductive synthetic resin glueSelf adhesive, highly conductive release tapeEasy applicationHigh shielding effectivenessOperating Temperature -25 to +85ºCApplications in EMI-Protection of doors and ...
This 710 Conductive Aluminium Foil Tape from Hi-Bond ...
Description:
This 710 Conductive Aluminium Foil Tape from Hi-Bond features a conductive, single-coated acrylic adhesive with a uniform dispersion of conductive particles. Shielding or repair of signal cable Blinding the end of knitted wire mesh of shielding cable Shield leaking or ...
Tesa 51408 series is a premium, hard wearing ...
Description:
Tesa 51408 series is a premium, hard wearing high temperature resistant masking tape. The Kapton tape is sturdily-fastened with a silicone adhesive. Kapton® backing with silicone adhesive Temperature rating -260°C for 1000 or, 350°C for 10 hours Ideal for masking ...
This 857DG Masking Tape from Hi-Bond is a ...
Description:
This 857DG Masking Tape from Hi-Bond is a silicone pressure sensitive adhesive tape that is produced in a dark green colour and constructed in three layers: PET film; Primer; Silicone adhesive. Powder coat maskingElectro-plate maskingSplicing siliconised films and papers.