Herga Air Switch Bellows

  • RS-artikelnummer 472-9979
  • Tillv. art.nr 6419-0020
  • Tillverkare / varumärke Herga
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Bulkhead Connector for Hand Held Actuator

Bulkhead Connector for hand held actuator

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Specifikationer
Attribute Value
Manufacturer Series 6419
Type Bellows
58 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
70,19 kr
(exkl. moms)
87,74 kr
(inkl. moms)
Enheter
Per unit
1 - 4
70,19 kr
5 - 11
67,95 kr
12 +
65,85 kr
Related Products
Festo SPAN series pressure sensors for monitoring compressed ...
Description:
Festo SPAN series pressure sensors for monitoring compressed air and non-corrosive gases. The measuring method is based on a piezoresistive measuring cell for relative pressure measurement. Pressure values are transmitted to the connected control system as a switching signal, as ...
Hinge-operated safety switch designed for interlocking hinged guard ...
Description:
Hinge-operated safety switch designed for interlocking hinged guard doors and access flapsMay be mounted in any direction in any position. The bored stainless steel operating shaft is mounted in a sealed bearing which is sufficiently robust to enable switch itself ...
The Festo vacuum switch is suitable for air ...
Description:
The Festo vacuum switch is suitable for air media. It measures the relative pressure type. It belongs to the VPEV series. It also has an LED indicator which shows the switching status. The contact type is SPDT type. The connection ...
One model has R1/8 threaded port connections, the ...
Description:
One model has R1/8 threaded port connections, the other uses an Ejector Interface and is for use only with the Multi Stage Combination Vacuum Pump, stock no. 725-298Max Pressure 5 bar The switch senses the level of vacuum set, which ...