Figaro Air Quality Sensor

  • RS-artikelnummer 134-6679
  • Tillv. art.nr FECS45-10
  • Tillverkare / varumärke Figaro
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Figaro FECS Series Gas Sensors

A range of electrochemical sensors from Figaro for the detection of various gases. The FECS series of compact PCB mounting gas sensors feature a unique leak-proof construction and high selectivity of the specified gas type. The sensors have a quick response time and provide a linear output with a stable baseline level.

The following sensors are available:

FECS40-1000 - Carbon monoxide
FECS41-250 - Nitric Oxide
FECS42-20 - Nitrogen Dioxide
FECS43-20 - Sulphur Dioxide
FECS44-100 – Ammonia (low concentration)
FECS44-1000 – Ammonia (high concentration)
FECS45-10 - Chlorine
FECS50-100 - Hydrogen Sulphide

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specifikationer
Attribute Value
Gases Detected Chlorine
Dimensions 20.4 (Dia.) x 16.5mm
Weight 4.5g
Maximum Operating Temperature +50 °C
Minimum Operating Temperature -20 °C
Width 20.4 (Dia.)mm
Height 16.5mm
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 905,15 kr
(exkl. moms)
2 381,44 kr
(inkl. moms)
Enheter
Per unit
1 - 1
1 905,15 kr
2 - 4
1 777,86 kr
5 +
1 671,25 kr
Related Products
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
The LPM2610 from Figaro is a pre-calibrated sensor ...
Description:
The LPM2610 from Figaro is a pre-calibrated sensor module for LP (liquefied petroleum) gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2610-D00 gas sensor which incorporates a filter to reduce ...
Gas sensors from Figaro for the detection of ...
Description:
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used ...