Figaro Air Quality Sensor

  • RS-artikelnummer 134-6657
  • Tillv. art.nr LPM2610-D09
  • Tillverkare / varumärke Figaro
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

LPM2610-D09 LP Gas Sensor Module

The LPM2610 from Figaro is a pre-calibrated sensor module for LP (liquefied petroleum) gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2610-D00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to LP gas. A temperature compensation circuit with a built-in thermistor and individually adjusted load resistor are also incorporated in the module, which is designed to meet the performance requirements of EN50194 and UL1484.

• Factory calibrated
• Temperature compensation circuit
• 5V operating voltage
• Compact module size
• Meets RoHS regulations

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specifikationer
Attribute Value
Gases Detected Butane, Propane
Dimensions 27 x 12.5 x 14.1mm
Weight 2.8g
Length 27mm
Maximum Operating Temperature +40 °C
Width 12.5mm
Minimum Operating Temperature 0 °C
Height 14.1mm
299 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
207,11 kr
(exkl. moms)
258,89 kr
(inkl. moms)
Enheter
Per unit
1 +
207,11 kr
Related Products
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
A gas sensor from Figaro using a micro-bead ...
Description:
A gas sensor from Figaro using a micro-bead structure suitable for the detection of both methane and carbon monoxide. The device is housed in a compact 3-pin PCB mounting package. • High sensitivity and selectivity to both methane and carbon ...
A compact PCB mounting gas sensor from Figaro ...
Description:
A compact PCB mounting gas sensor from Figaro with high sensitivity to alcohol and organic solvent vapours. • Low power consumption• Long life and low cost• Uses simple electrical circuit.