Figaro Air Quality Sensor

  • RS-artikelnummer 134-6643
  • Tillv. art.nr TGS2611-C00
  • Tillverkare / varumärke Figaro
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

TGS2610/2611/2612 Methane and LP Gas Sensors

Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.

• Compact 4-lead TO-5 package
• Low power consumption
• Long life and low cost
• Uses simple electrical circuit

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specifikationer
Attribute Value
Gases Detected Methane
Dimensions 9.2 (Dia.) x 7.8mm
Weight 1.2g
Height 7.8mm
Width 9.2 (Dia.)mm
36 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
225,93 kr
(exkl. moms)
282,41 kr
(inkl. moms)
Enheter
Per unit
1 - 4
225,93 kr
5 - 9
210,83 kr
10 +
198,22 kr
Related Products
BPS pressure sensors are based on innovative MEMS ...
Description:
BPS pressure sensors are based on innovative MEMS technology which provides extremely accurate condition readings in a miniature package size. The sensing element is comprised of embedded piezoresistive elements bonded to a chemically etched silicon diaphragm. Compensated outputDirect-media monitoringGauge and ...
The iAQ-Core is a compact module for determining ...
Description:
The iAQ-Core is a compact module for determining indoor air quality. The MEMS technology sensor measures a broad range of VOCs (Volatile Organic Compounds) yielding a Total Volatile Organic Compound (TVOC) reading. Output: 450 to 2000ppm CO2 equivalent and 125 ...
Connects to a network via USB or Bluetooth® ...
Description:
Connects to a network via USB or Bluetooth® to enable the sending of measurement dataUsing OMRON's unique and innovative algorithm, enables highly accurate determination of earthquakes based on vibrational accelerationEnables continuous monitoring of room air quality using a VOC sensor. ...
SGPC3 is a digital low-power gas sensor designed ...
Description:
SGPC3 is a digital low-power gas sensor designed for indoor air quality applications. Sensirion’s CMOSens® technology offers a complete sensor system on a single chip featuring a digital I2C interface and a temperature controlled micro hotplate and a preprocessed indoor ...