Schneider Electric U-Line Advanced Motor Starter 7.5 hp, 110 → 220 V dc, 110 → 240 V ac, 12 A

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR
Produktdetaljer

Power Base

This is one of the two basic units which is required everytime, together with a control unit. It is independent of the control voltage motor power and incorporates the breaking function

Breaking capacity of 50kA @400Vac
Short circuit protection
Disconnection/isolation
Two auxiliary contacts (1NO+1NC)
Padlockable
45mm wide

Note

Current shown is when at a voltage of 440V is utilised. LUB**** series power bases are non-reversing, LU2B**** series are reversing types.

//media.rs-online.com/t_line/LF493885-01.jpg

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Warning

  • Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.
Specifikationer
Attribute Value
Series U-Line
Component Type Power Base
Range TeSys
Power Rating 7.5 hp
Control Voltage 110 → 220 V dc, 110 → 240 V ac
20 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
372,25 kr
(exkl. moms)
465,31 kr
(inkl. moms)
Enheter
Per unit
1 - 4
372,25 kr
5 +
353,64 kr
Related Products
The ATEX approved, ELR series of Contractron 4 ...
Description:
The ATEX approved, ELR series of Contractron 4 in 1 hybrid motor starters from Phoenix Contacts give you an alternative to the traditional mechanical contractor circuits.The highly functional, DIN Rail mounting, reversing starter can be used where a three-phase induction ...
SIRIUS 3RM1 motor starters are compact devices 22.5 ...
Description:
SIRIUS 3RM1 motor starters are compact devices 22.5 mm wide, combining a large number of functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and a solid-state overload relay for switching induction under normal ...
BSH servo motors are compact and dynamic for ...
Description:
BSH servo motors are compact and dynamic for use with Lexium05 servo drives. The SinCos hiperface encoders allow the drive to read the motor parameters directly when connected. A variety of motor winding options are available to provide different nominal ...
Ideal to satisfy the basic protection requirements for ...
Description:
Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit. Protection against overloads and short-circuitsProtection against phase failure and phase imbalanceProtection against insulation breaks (equipment protection only)Manual resetClass 10 for 3-phase motors.