Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.

Where can a Bearing Puller be used?

One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:

Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.

Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.

Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.

Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.

How Bearing Pullers work

Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.

Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.
  • Reversible for internal or external uses
  • Two or three claw design
  • Spring loaded centre point

...
Read more Read less

Filter

Visar 1 - 20 av 84 produkter
Resultat per sida
Beskrivning Pris Capacity Hydraulic Force Operation Number of Pieces Case Material For Use With Jaw Reach
RS-artikelnummer 247-436
Tillv. art.nrGEDORE 100-0705
VarumärkeGedore
1 309,46 kr
Pr. Kit
Sats(er)
10 → 50 mm - Gear 9 Plastic - -
RS-artikelnummer 124-8437
Tillv. art.nrTMIP30-60
VarumärkeSKF
6 556,70 kr
Each
Enheter
30 → 60 mm - Gear 2 - - -
RS-artikelnummer 732-4735
Tillv. art.nrTMMK 10-35
VarumärkeSKF
10 701,18 kr
Each
Enheter
10 → 35 mm - Hand - - - -
RS-artikelnummer 300-6275
Tillv. art.nrU.35P
VarumärkeFacom
1 294,36 kr
Each
Enheter
55 mm - Gear - - - -
RS-artikelnummer 189-538
Tillv. art.nrTMIP 7-28
VarumärkeSKF
5 247,86 kr
Pr. Kit
Sats(er)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm - Hand 6 - - -
RS-artikelnummer 124-8442
Tillv. art.nrTMBS150E
VarumärkeSKF
8 473,42 kr
Each
Enheter
- - Hand 14 - - -
RS-artikelnummer 612-5688
Tillv. art.nrTMMA 60
VarumärkeSKF
4 036,74 kr
Each
Enheter
36 → 150 mm - Hydraulic - - - -
RS-artikelnummer 237-798
Tillv. art.nrGEDORE 9.00/1
VarumärkeGedore
1 723,06 kr
Pr. Kit
Sats(er)
- - Gear 3 - - -
RS-artikelnummer 237-776
Tillv. art.nrGEDORE 9.00/3
VarumärkeGedore
1 860,89 kr
Pr. Kit
Sats(er)
40 → 120 Spread mm 2t Lever Press 3 Plastic - -
RS-artikelnummer 237-805
Tillv. art.nrGEDORE 9.00/4
VarumärkeGedore
2 412,22 kr
Pr. Kit
Sats(er)
5 → 60 mm, 40 → 120 mm, 90 mm, 110 mm - Gear 4 - - -
RS-artikelnummer 845-8359
Tillv. art.nrTMMP 2X170
VarumärkeSKF
1 244,01 kr
Each
Enheter
170 mm 2t Hand - High Quality Carbon Steel - -
RS-artikelnummer 669-8215
Tillv. art.nrU.306-180
VarumärkeFacom
3 305,21 kr
Each
Enheter
180 mm - Gear - - - -
RS-artikelnummer 237-748
Tillv. art.nrGEDORE 9.00/2
VarumärkeGedore
5 927,20 kr
Pr. Kit
Sats(er)
- 10N Hydraulic - - - -
RS-artikelnummer 237-754
Tillv. art.nrGEDORE 1.13/01
VarumärkeGedore
368,41 kr
Each
Enheter
60 mm - Lever Press - - - -
RS-artikelnummer 434-2572
VarumärkeRS PRO
400,05 kr
Each
Enheter
19 → 45 mm - Lever Press 2 - - -
RS-artikelnummer 349-7233
VarumärkeRS PRO
492,18 kr
Each
Enheter
9/32 → 3 in - Gear - - - -
RS-artikelnummer 124-8444
Tillv. art.nrTMHS100
VarumärkeSKF
5 671,39 kr
Each
Enheter
- - Hydraulic - - - -
RS-artikelnummer 300-6269
Tillv. art.nrU.35L
VarumärkeFacom
1 748,49 kr
Each
Enheter
15 → 75 mm - Gear - - - -
RS-artikelnummer 612-5694
Tillv. art.nrTMMD100
VarumärkeSKF
8 042,76 kr
Each
Enheter
10 → 100 mm - Hand 22 - - -
RS-artikelnummer 349-7312
VarumärkeRS PRO
316,61 kr
Each
Enheter
200 mm - Lever Press - - - -