End Mills

An end mill is a type of cutting tool that is used in milling applications.
They have cutting edges on the end and sides of the shank enabling them to cut in all directions.
The purpose of an end mill
The end mill remove material by their movement within the milling machine or from the cutter’s shape.
The number of flutes (spirals on the end mill) give different results
• 2 flute allows maximum space for chip ejection and is used for general milling operations
• 3 flute is an excellent choice for slotting, it has a larger cross section and is used in general milling operations
• 4, 5, 6 and 8 flute can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish
End cut types
• Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.
• Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types
• End mills with a plain shank are used with a collet style holder and are the most common shank type
• End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it from rotating

Typical applications
End mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.

...
Read more Read less

Filter

Visar 1 - 20 av 83 produkter
Resultat per sida
Beskrivning Pris Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS-artikelnummer 728-7989
Tillv. art.nrC2478.0
VarumärkeDormer
530,44 kr
Each
Enheter
8mm 19mm 4 HSCo 69 mm Weldon 10 mm Yes K10
RS-artikelnummer 523-0600
VarumärkeRS PRO
79,47 kr
Each
Enheter
6mm 16mm 3 HSS 48 mm Weldon 6 mm - -
RS-artikelnummer 523-0515
VarumärkeRS PRO
84,79 kr
Each
Enheter
6mm 9.5mm 3 HSCo 36 mm Weldon 6 mm - -
RS-artikelnummer 666-6681
Tillv. art.nrS9042.0
VarumärkeDormer
158,20 kr
Each
Enheter
2mm 6mm 4 Solid Carbide 38 mm Plain 3 mm Yes H12
RS-artikelnummer 523-0521
VarumärkeRS PRO
88,81 kr
Each
Enheter
1.5mm 4mm 3 HSS 28 mm Weldon 6 mm - -
RS-artikelnummer 523-0436
VarumärkeRS PRO
88,16 kr
Each
Enheter
1mm 2mm 3 HSCo 24.5 mm Weldon 6 mm - -
RS-artikelnummer 728-7853
Tillv. art.nrC2471/2
VarumärkeDormer
924,75 kr
Each
Enheter
1/2in 26mm 4 HSS-E-PM 83 mm Weldon 12 mm - K10
RS-artikelnummer 523-0464
VarumärkeRS PRO
84,47 kr
Each
Enheter
2.5mm 4mm 3 HSCo 26 mm Weldon 6 mm - -
RS-artikelnummer 523-0492
VarumärkeRS PRO
84,36 kr
Each
Enheter
4mm 6.5mm 3 HSCo 32.5 mm Weldon 6 mm - -
RS-artikelnummer 666-6710
Tillv. art.nrS90410.0
VarumärkeDormer
365,00 kr
Each
Enheter
10mm 22mm 4 Solid Carbide 72 mm Plain 10 mm Yes H12
RS-artikelnummer 728-7835
Tillv. art.nrC2473/16
VarumärkeDormer
462,24 kr
Each
Enheter
3/16in 13mm 4 HSS-E-PM 57 mm Weldon 6 mm - K10
RS-artikelnummer 666-6713
Tillv. art.nrS9048.0
VarumärkeDormer
263,67 kr
Each
Enheter
8mm 19mm 4 Solid Carbide 63 mm Plain 8 mm Yes H12
RS-artikelnummer 523-0509
VarumärkeRS PRO
87,29 kr
Each
Enheter
5mm 7.5mm 3 HSCo 36 mm Weldon 6 mm - -
RS-artikelnummer 728-7967
Tillv. art.nrC2474.0
VarumärkeDormer
419,80 kr
Each
Enheter
4mm 11mm 4 HSCo 55 mm Weldon 6 mm Yes K10
RS-artikelnummer 666-6690
Tillv. art.nrS9042.5
VarumärkeDormer
200,60 kr
Each
Enheter
2.5mm 9mm 4 Solid Carbide 38 mm Plain 3 mm Yes H12
RS-artikelnummer 728-7838
Tillv. art.nrC2472.5
VarumärkeDormer
492,43 kr
Each
Enheter
2.5mm 8mm 4 HSCo 52 mm Weldon 6 mm Yes K10
RS-artikelnummer 666-6716
Tillv. art.nrS9049.0
VarumärkeDormer
326,74 kr
Each
Enheter
9mm 21mm 4 Solid Carbide 72 mm Plain 10 mm Yes H12
RS-artikelnummer 728-7954
Tillv. art.nrC2473.0
VarumärkeDormer
418,77 kr
Each
Enheter
3mm 8mm 4 HSCo 52 mm Weldon 6 mm Yes K10
RS-artikelnummer 666-6729
Tillv. art.nrS90412.0
VarumärkeDormer
519,07 kr
Each
Enheter
12mm 25mm 4 Solid Carbide 73 mm Plain 12 mm Yes H12
RS-artikelnummer 728-7904
Tillv. art.nrC2739.0
VarumärkeDormer
693,81 kr
Each
Enheter
9mm 38mm 4 HSCo 88 mm Weldon 10 mm Yes K10
Related Products
A range of standard length and long series ...
Description:
A range of standard length and long series Clarkson Osborn FC3 throw-away milling cutters. Manufactured from High Speed Cobalt steel (HSSE) and intended for use in Clarkson FC3 Holders and adaptors.
Introducing the Dormer's multi-application MC-X solid carbide end ...
Description:
Introducing the Dormer's multi-application MC-X solid carbide end mills cutters that are manufactured from micro-grain, high-quality carbide to provide increased hardness and toughness for excellent wear-resistance and long tool life. The flute geometry of the 4 flute cutters is capable ...
HSCo-XP flatted shank for machining profiles and steps, ...
Description:
HSCo-XP flatted shank for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool lifeSuperior edge strength and rigidity resulting in improved surface finish and slot ...
HSCo-XP flatted shank end mill for machining profiles ...
Description:
HSCo-XP flatted shank end mill for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool lifeSuperior edge strength and rigidity resulting in improved surface finish ...