Socket Testers

A socket tester is a small, hand held device that is plugged into a socket to quickly confirm that an AC wall outlet is working and can provide the power that is needed to power the devise that will be plugged into it.

Socket testers are used to ensure that the wiring is the correct way round. It will detect when there is no earth but will not check if the earth is in good condition if it is there.

The lights on the front of the mains outlet tester will light up in different combinations, this will indicate if there is any type of fault.

There are different types of socket testers:

Simple testers can detect a number of different faults but they cannot indicate or measure effective the earth fault loop impedance. They are normally the same size as a 13A plug.

Advanced testers have the same normal functions that a simple tester has including reversed line and earth, or reversed line and neutral. They display the range of numerical values that the earth fault loop impedance falls.

Professional testers have the same normal functions that a simple tester has including displaying numerical value of earth loop impedance. They also be used to measure the values of earth loop impedance to certify or report on the installation that has been carried out.

Who would use a socket tester?

Electricians, maintenance personnel, DIY enthusiasts, handymen and equipment installers would general have a mains socket tester in their toolbox to check the safety of the socket and prevent shocks and accidents occurring.


...
Read more Read less

Filter

Visar 1 - 20 av 43 produkter
Resultat per sida
Beskrivning Pris Current Rating Voltage Audible Alarm Calibrated Earth Loop Impedance Test Number of Pins Wiring Check Display Type Safety Category Power Source Dimensions Weight Height Length
RS-artikelnummer 719-0885
Tillv. art.nrRSCP501
VarumärkeMartindale
227,48 kr
Each
Enheter
13A 200 → 250V ac - - - 3 Yes LED CAT II 300 V Mains 65 x 65 x 47mm - 47mm 65mm
RS-artikelnummer 776-2014
Tillv. art.nrMARPC105/32
VarumärkeMartindale
1 137,40 kr
Each
Enheter
32A - - - Yes 5 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 776-2005
Tillv. art.nrMARPC105/16
VarumärkeMartindale
1 075,36 kr
Each
Enheter
16A - - - Yes 5 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 776-4732
Tillv. art.nrRSPC105/16
VarumärkeMartindale
1 601,36 kr
Each
Enheter
16A - - RSCAL Yes 5 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 716-1073
Tillv. art.nrRSCP501
VarumärkeMartindale
753,48 kr
Each
Enheter
13A 200 → 250V ac - RSCAL - 3 Yes LED CAT II 300 V Mains 65 x 65 x 47mm - 47mm 65mm
RS-artikelnummer 776-4742
Tillv. art.nrRSPC105/32
VarumärkeMartindale
1 663,40 kr
Each
Enheter
32A - - RSCAL Yes 5 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 704-7747
Tillv. art.nrSOK 36
VarumärkeSocket & See
531,20 kr
Each
Enheter
13A 230V ac Yes - Yes - Yes LED - Mains - - - -
RS-artikelnummer 704-8703
Tillv. art.nrSOK 36
VarumärkeSocket & See
1 057,20 kr
Each
Enheter
13A 230V ac Yes RSCAL Yes - Yes LED - Mains - - - -
RS-artikelnummer 253-541
Tillv. art.nrRSCP301
VarumärkeMartindale
589,38 kr
Each
Enheter
30mA 110V ac - - - 3 Yes LED CAT II 150 V Mains - 180g - -
RS-artikelnummer 467-4964
Tillv. art.nrSOK 40/16
VarumärkeSocket & See
488,00 kr
Each
Enheter
16A 230V ac Yes - - 3 Yes LED - Mains - - - -
Nytt
RS-artikelnummer 192-5832
Tillv. art.nrRSPC104/63
VarumärkeMartindale
2 294,14 kr
Each
Enheter
- - - - - - - - - - - - - -
RS-artikelnummer 776-2001
Tillv. art.nrMARPC104/63
VarumärkeMartindale
1 768,14 kr
Each
Enheter
63A - - - Yes 4 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 424-8420
Tillv. art.nrRSCP201
VarumärkeMartindale
1 084,36 kr
Each
Enheter
16A 230V ac - RSCAL - 3 Yes LED CAT III 300 V Mains 65 x 65 x 47mm 195g - -
RS-artikelnummer 467-4986
Tillv. art.nrSOK 50/16HD
VarumärkeSocket & See
520,00 kr
Each
Enheter
16A 110V ac Yes - - 3 Yes LED - Mains - - - -
RS-artikelnummer 467-5658
Tillv. art.nrSOK 50/16HD
VarumärkeSocket & See
1 046,00 kr
Each
Enheter
16A 110V ac Yes RSCAL - 3 Yes LED - Mains - - - -
RS-artikelnummer 253-535
Tillv. art.nrRSCP201
VarumärkeMartindale
558,36 kr
Each
Enheter
16A 230V ac - - - 3 Yes LED CAT III 300 V Mains 65 x 65 x 47mm 195g - -
RS-artikelnummer 776-2008
Tillv. art.nrMARPC104/32
VarumärkeMartindale
1 075,36 kr
Each
Enheter
32A - - - Yes 4 Yes Front Panel CAT III 300 V Mains 131 x 94 x 54mm 292g 54mm 131mm
RS-artikelnummer 719-0905
Tillv. art.nrRSEZ650
VarumärkeMartindale
1 457,94 kr
Each
Enheter
13A 230V ac - - Yes 3 Yes LED CAT II 300 V Mains 315 x 260 x 85mm 1kg 85mm 315mm
RS-artikelnummer 716-1111
Tillv. art.nrSOK 32
VarumärkeSocket & See
821,84 kr
Each
Enheter
13A 230V ac Yes RSCAL - 3 Yes LED - Mains - - - -
RS-artikelnummer 719-0891
Tillv. art.nrRSBZ101
VarumärkeMartindale
258,50 kr
Each
Enheter
13A 230V ac Yes - - 3 Yes LED CAT IV 300 V Mains 65 x 65 x 47mm - 47mm 65mm
Related Products
TEK 402/404 are compact, versatile, battery powered instruments ...
Description:
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB ...
VoltALERT non-contact voltage tester is the next generation ...
Description:
VoltALERT non-contact voltage tester is the next generation from Fluke, designed for ease of use. Simply touch the tip of the device to a terminal strip, supply wire or outlet and the whole nib glows red with a beeping noise ...
The Fluke phase rotation indicator has a voltage ...
Description:
The Fluke phase rotation indicator has a voltage range of 40V to 700V and frequency range of 15Hz to 400Hz. It shows a clear indication of three-phase systems and the phase rotation direction to determine correct connections. This allows rapid ...
16A BS 4343 3 pin (2P+E) socket tester ...
Description:
16A BS 4343 3 pin (2P+E) socket tester for testing 240V systems. Logical green for go indication shows good wiring status - 3 green LEDs indicate good wiring statusDetects 18 faulty wiring conditionContinuous audible tone indicates correct wiringStrong warbling tone ...