Electrical Installation Testers

Electrical installation testers verify the safety of electrical installations in domestic, commercial and industrial settings. They ensure that fixed wiring is safe and correctly installed to meet relevant local standards and safety requirements. 


Uses of electrical installation testers


You can use electrical installation testers for a variety of tests, including:

  • Insulation-continuity tests – diagnose breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The quality of insulation is critical in ensuring uninterrupted and safe functioning of electrical circuits.  
  • Checking RCD devices – check the proper functioning of residual-current devices (RCDs). RCDs are designed to disconnect quickly to mitigate the harm caused from electric shock and to avoid current leaks that may lead to fire and other dangerous situations. 
  • Loop testing – a quick, convenient, and specific method of evaluating an electrical circuit's ability to engage protective devices (circuit breakers, fuses, RCDs). A ground loop determines the effectiveness of protective devices.
  • Resistance measurement of grounding systems – verification tests to ensure that a system's resistance is low enough to provide protection to people, equipment and structures. 

...
Read more Read less

Filter

Visar 1 - 20 av 39 produkter
Resultat per sida
Beskrivning Pris Calibrated Loop Impedance Test Type Automatic RCD Test RCD Ramp Test Non-Tripping Insulation Test Voltage Maximum Voltage Measurement Test Type Earth Resistance Measurement Downloadable Data Interface Type Continuity Test Current RCD Test Type Remote Switch Mode
RS-artikelnummer 177-9342
VarumärkeRS PRO
6 204,90 kr
Pr. Kit
Sats(er)
- Phase to Earth Yes Yes Yes 1000V 1000V - - - Bluetooth 1mA - -
RS-artikelnummer 144-5338
VarumärkeRS PRO
5 095,50 kr
Each
Enheter
- Phase to Earth Yes Yes Yes 1000V 1000V - Yes - Bluetooth 1mA General, Selective -
RS-artikelnummer 144-5351
VarumärkeRS PRO
7 496,30 kr
Each
Enheter
UKAS Phase to Earth Yes Yes Yes 1000V 1000V - - - Bluetooth 1mA - -
RS-artikelnummer 144-5350
VarumärkeRS PRO
5 976,50 kr
Each
Enheter
RSCAL Phase to Earth Yes Yes Yes 1000V 1000V - - - Bluetooth 1mA - -
RS-artikelnummer 309-5758
Tillv. art.nrDT-155
VarumärkeCatu
2 223,10 kr
Each
Enheter
- - - - - - 230V - Yes - - 30 mA, 300 mA, 500 mA, 650 mA - -
RS-artikelnummer 704-0487
Tillv. art.nr1002-415
VarumärkeMegger
16 802,50 kr
Each
Enheter
- 2 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity, Wiring Polarity Yes Yes German Mains 15 mA, 200 mA AC Type, DC Selective -
RS-artikelnummer 799-9011
Tillv. art.nrP01157702
VarumärkeChauvin Arnoux
44 668,80 kr
Each
Enheter
- - - - - - - Wiring Polarity - Yes USB - - -
RS-artikelnummer 187-2477
Tillv. art.nrCA 6133
VarumärkeChauvin Arnoux
8 206,46 kr
Each
Enheter
- - Yes Yes Yes 250 V, 500 V, 1000 V 550 V ac, 800 V dc - Yes - USB 200mA A, AC Yes
RS-artikelnummer 899-8205
Tillv. art.nrM503B
VarumärkeGossen Metrawatt
16 802,50 kr
Each
Enheter
- Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes
Nytt
RS-artikelnummer 200-5408
Tillv. art.nr1663 SCH-DMM/F
VarumärkeFluke
11 999,00 kr
Each
Enheter
- Line to Earth Yes Yes No 1000V - - - - - - - -
RS-artikelnummer 172-0821
Tillv. art.nr1009-987
VarumärkeMegger
21 653,63 kr
Each
Enheter
UKAS 2 Wire (Hi Current), 2 Wire (Non-Trip Range), 3 Wire (Non-Trip Range) Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Auto Test, Continuity, Earth Resistance, Insulation, Loop Test, RCD Ramp Test, RCD Test, Resistance Yes Yes Bluetooth 15 mA, 200 mA A, AC, B, DC, S -
RS-artikelnummer 117-6032
Tillv. art.nr1008-122
VarumärkeMegger
13 050,75 kr
Each
Enheter
UKAS 2 Wire, 3 Wire Yes Yes Yes 250 V, 500 V, 1000 V 600V Continuity Yes - Wireless 200mA A, AC, S -
RS-artikelnummer 117-6665
Tillv. art.nrFLK-1662 SCH
VarumärkeFluke
9 499,00 kr
Each
Enheter
- Phase to Earth, Phase to Neutral Yes Yes - 100 V, 250 V, 500 V, 1000 V 500V ac/dc Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity - - - 10mA A/F, AC Type, G, S Yes
RS-artikelnummer 811-1262
Tillv. art.nrM500P
VarumärkeGossen Metrawatt
20 835,00 kr
Each
Enheter
- - - - - - - - - - - - - -
RS-artikelnummer 175-4076
Tillv. art.nr1009-990
VarumärkeMegger
19 262,65 kr
Each
Enheter
- - Yes Yes Yes 100 V, 250 V, 500 V, 600 V, 1000 V 600V - Yes Yes Bluetooth 205mA - -
RS-artikelnummer 189-3830
Tillv. art.nrT6-1000 KIT2
VarumärkeFluke
2 688,00 kr
Each
Enheter
- - - - - - - - - - - - - -
RS-artikelnummer 867-5624
Tillv. art.nrM501C
VarumärkeGossen Metrawatt
24 971,10 kr
Each
Enheter
- - - - - - - - - - - - - -
RS-artikelnummer 899-8201
Tillv. art.nrM503A
VarumärkeGossen Metrawatt
13 597,10 kr
Each
Enheter
- Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes
RS-artikelnummer 899-8208
Tillv. art.nrM520T
VarumärkeGossen Metrawatt
10 319,32 kr
Each
Enheter
- 3 Wire Yes Yes Yes 1000V 600V Wiring Polarity Yes - - 15mA AC Type, DC Selective Yes
RS-artikelnummer 136-5806
Tillv. art.nrM520P
VarumärkeGossen Metrawatt
23 730,30 kr
Each
Enheter
- Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R -
Related Products
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, PRO-Schuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, Universal Carrying Pouch F2010 Z700G, Battery Pack Master Z502H and charger Z502R. Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phasesequence and voltageOFFSET Management RL-PE / RN-PE ...
A range of insulation testers that meet the ...
Description:
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue ...
The 103 offers simple straightforward operation in a ...
Description:
The 103 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Earth Bond TestPerforms a.c./d.c. Flash and d.c. IR testsFully isolated HT outputs ...