Intelligent Power Switches

The IPS (Intelligent Power Switch) is a great problem solver.


Intelligent power switches are largely used in the automotive for a variety of jobs. They also play a big role in the “Smart Home” products. An Intelligent power switch makes everything simpler by combining more than one job, into a single process. Not to mention they are applied in PAC (Programmable Automation Controller), CNC (Computer Numerical Control) & PLC (Programmable Logic Controller), robotics, agricultural systems, security systems & used in green energy, like wind turbines!


Features of an IPS (Intelligent Power Switch)


IPS’s have multifunction’s that include better power saving and power utilization in the field of use. They also include great features like being able to deal with ground loss or offset, voltage peaks and reversal or disconnected battery. The intelligent power switch device can also integrate logic interface, drivers and diagnostic and protection features. They even have the capacity to deal with overcurrent and overloads. A variety of chips are also ESD protected.


The main benefits of using an IPS rather than a conventional chip would be increased system reliability, lots more compactness, great built-in protection and overall cost reduction. We have a variety of intelligent power switches for a high side or low side system. High side switches are great for use in inductive, capacitive and resistive loads.


In the intelligent power switch lays an embedded MOSFET (Metal Oxide Semiconductor Field Effect Transistor) which is positioned between the VCC and the OUT pins. Intelligent power switches can vary with operating voltage and depending on the chip, can range from 85v - 265v or 16v-85v.


With most electronics, thermal heat can be a problem, but with an intelligent power switch, it’s not so much a problem. With lots of switches containing overtemperature protection and some switches even being able to handle harsh temperatures such as -40 to +150°C.


...
Read more Read less

Filter

Visar 781 - 784 av 784 produkter
Resultat per sida
Beskrivning Pris Power Switch Topology Power Switch Type Switch On Resistance Number of Outputs Voltage Current Power Rating Mounting Type Package Type Pin Count Dimensions Power Switch Features Length Protection Features
RS-artikelnummer 168-6477
Tillv. art.nrL6375S
VarumärkeSTMicroelectronics
15,847 kr
Each (In a Tube of 100)
Enheter
- - - 1 - - - Surface Mount SOIC 8 5 x 4 x 1.25mm - 5mm -
Nytt
RS-artikelnummer 196-2099
Tillv. art.nrSTMPS2171STR
VarumärkeSTMicroelectronics
5,178 kr
Each (In a Pack of 25)
Enheter
High Side MOSFET Switch - 1 5.5V 1000mA - Surface Mount SOT-23 5 3 x 1.7 x 1.3mm - 3mm -
RS-artikelnummer 189-2116
Tillv. art.nrSTMPS2141MTR
VarumärkeSTMicroelectronics
3,383 kr
Each (In a Pack of 25)
Enheter
High Side MOSFET Switch 110mΩ 1 2.7 → 5.5V 12µA - Surface Mount SO 8 5 x 4 x 1.65mm - 5mm -
RS-artikelnummer 166-3622
Tillv. art.nrFSFR1700XSL
VarumärkeON Semiconductor
21,583 kr
Each (In a Tube of 19)
Enheter
- Resonant Converter 1.25Ω 1 350 → 400V - 100W Through Hole SIP 10 26.2 x 10.7 x 3.4mm - 26.2mm -
Related Products
The Flyback controllers, Line Level Control (LLC) controllers, ...
Description:
The Flyback controllers, Line Level Control (LLC) controllers, and Primary-Side Regulation controllers offer Crucial energy savings to address the needs of Switch Mode Power Supply (SMPS) designs.All controllers come with integrated soft-start, and protection features from over-voltage, open-feedback, overload, ...
The HITFET Automotive Smart Low-Side Switch Series offers ...
Description:
The HITFET Automotive Smart Low-Side Switch Series offers built in protection against ESD, over-temperature, short circuit and overload conditions. The HITFET family has switch on resistance up to 480 milliohm and can be scaled in RDSon. Diagnosis or latch and ...
The OMNIFET series of fully auto-protected low-side drivers, ...
Description:
The OMNIFET series of fully auto-protected low-side drivers, are measured on the criteria of ruggedness and improved reliability. These solid state power switches are designed for inductive or resistive loads, especially in the automotive environment. Linear current limitationThermal shut downShort ...
High-side switches can safely drive high currents in ...
Description:
High-side switches can safely drive high currents in resistive, inductive and capacitive grounded loads. Designed to work in the harsh automotive environment they requires both robust, low on-resistance power switch and accurate analogue circuitry for diagnostic, protection and control functions. ...