Door Stops

Door stops are also known as a door stoppers or door wedges. Door stops are used to hold doors open or to prevent damage to doors and walls. Using a door stop can prevent wear or damage to plaster on the walls, saving the need for repairs.


Door stops are usually made from aluminium, PVC, rubber, chrome, brass or stainless steel. They can also be plated using a metal finish, such as chrome-plated. Different door stops are used in rooms throughout homes and across industries such as medical and automotive industries, warehouses and distribution centres where there is a high volume traffic going through doors.


Types of door stop


Doorstops can be attached to either the wall or skirting board behind the door, or to the floor where you wish the door to stop. They are attached using fixings such as screws. Door stops that are attached to the wall are usually a few inches above the ground. The rubber dome or cylinder type door stops are sometimes known as a wall bumper.



  • Spring door stops are primary made from a metal spring with a rubber stopper on the end. The spring absorbs some of the force of the door as it hits the door stop.

  • Floor mounted door stops are installed onto the floor and are more discrete. They enable you to stop a door from opening into an area or into another object. Floor door stops can be used where there is not a wall or skirting board to attach to.

  • Kick down door stops are used as door holders. They attach to the door itself and can be kicked down into position to hold the door in place.

  • Wall Bumpers protect walls and skirting board from coming into contact with the opening door. They are usually made from a rubber or plastic so as not to damage the door.

  • Projection door stops attach to the wall and are usually a metal rod with a rubber tip. They prevent the door from coming into contact with the wall.

...
Read more Read less

Filter

Visar 1 - 12 av 12 produkter
Resultat per sida
Beskrivning Pris Material Colour Diameter Length
RS-artikelnummer 751-253
VarumärkeRS PRO
129,60 kr
1 Pair(s)
Par
- Grey 4.5mm 155mm
RS-artikelnummer 894-6935
VarumärkeRS PRO
157,70 kr
Each
Enheter
Stainless Steel - - -
RS-artikelnummer 894-6929
VarumärkeRS PRO
15,353 kr
Each (In a Pack of 4)
Enheter
PVC White 32mm -
RS-artikelnummer 894-6904
VarumärkeRS PRO
127,10 kr
Each
Enheter
Stainless Steel - - -
RS-artikelnummer 894-6932
VarumärkeRS PRO
165,11 kr
Each
Enheter
Stainless Steel - - -
RS-artikelnummer 894-6917
VarumärkeRS PRO
14,725 kr
Each (In a Pack of 4)
Enheter
PVC Black 32mm -
RS-artikelnummer 894-6923
VarumärkeRS PRO
13,29 kr
Each (In a Pack of 4)
Enheter
PVC White 25mm -
RS-artikelnummer 894-6901
VarumärkeRS PRO
25,80 kr
Each
Enheter
Aluminium - - -
RS-artikelnummer 894-6913
VarumärkeRS PRO
30,81 kr
Each (In a Pack of 2)
Enheter
Aluminium - - -
RS-artikelnummer 894-6926
VarumärkeRS PRO
13,108 kr
Each (In a Pack of 4)
Enheter
PVC Black 25mm -
RS-artikelnummer 894-6894
VarumärkeRS PRO
27,654 kr
Each (In a Pack of 5)
Enheter
Aluminium - - -
RS-artikelnummer 894-6907
VarumärkeRS PRO
100,47 kr
Each
Enheter
Stainless Steel - - -
Related Products
These latches are very useful for securing cupboard ...
Description:
These latches are very useful for securing cupboard doorsFixing, 3 or 4mm dia countersunk screwsZinc plated steel with 304 stainless steel springs (latches only)Catches 7 to 9 are Zinc plated steelLatches and catches available in 3 sizesUse catch 7 with ...
The adjustable power 2003V provides the flexibility to ...
Description:
The adjustable power 2003V provides the flexibility to 'fine tune' the closing power of the door control in order to achieve the low 'opening forces' necessary to satisfy the requirements of Approved Document M of The Building Regulations and the ...
A single action surface mounted electro-magnetically controlled door ...
Description:
A single action surface mounted electro-magnetically controlled door closer. By a simple change in the installation there is the choice of 'hold-open' or a 'swing-free' function. The unit can be door mounted to 'pull' side of door or transom mounted ...
Small compact unit with pressure diecast aluminium body, ...
Description:
Small compact unit with pressure diecast aluminium body, steel rack and pinion and sintered bearingsMax door width 950mmMax door weight 60kgIndependent regulator controls for door speed and latch controlNon-handed mechanism180° door opening subject to hinge projection and surrounding structureSuitable for ...