ESD Continuous Monitors

ESD continuous monitors, or constant monitors, continuously check for electrostatic discharge (ESD) on work surfaces. This is important for preventing damage to sensitive electronic equipment or to monitor discharge in areas where there is a danger of igniting flammable liquids or gases. Other grounding components such as wrist straps, ESD safe matsand ESD grounding cordscan be attached to the monitors, connecting work surfaces and operators.

LEDs (light emitting diodes) indicate different colours to alert users if there is a discharge, sometimes accompanied by an audible alarm.

What are ESD continuous monitors used for?

ESD continuous monitors save set-up time, ensuring integrity of the entire ground loop, meaning wrist straps and other ESD accessories don’t need to be checked individually at the start of a shift.

Types of ESD continuous monitors

Some monitors not only detect static electricity, but also actively eliminate it by balancing ions. This type of continuous monitor is called an ’ioniser’, ’ionising bar’ or ’static bar’.

Monitors can be connected to one or two wrist straps and one or two work surfaces, plus grounding. Terminal types and supply voltages vary. Some products include EOS (electrical overstress) detection and/or charge detection.


...
Read more Read less

Filter

Visar 1 - 8 av 8 produkter
Resultat per sida
Beskrivning Pris Terminal Type Supply Voltage Height Number of Operators Length Number of Worksurfaces Width Supervisor Monitoring Parking Station Charge Detection EOS Detection Complies with EN 61340-5-1
RS-artikelnummer 168-5578
Tillv. art.nr19243
VarumärkeDesco
2 576,73 kr
Each
Enheter
Snap, 10 mm Jack, 10 mm Snap 24 V dc, 100 → 240 V ac 23 mm 1 70mm 1 53mm - - - Yes -
RS-artikelnummer 918-5618
Tillv. art.nr724MO
VarumärkeSCS
2 121,87 kr
Each
Enheter
Snap 100 → 120V ac 35 mm 1 165mm 1 79mm No No No No Yes
RS-artikelnummer 685-8763
Tillv. art.nr99093
VarumärkeCharleswater
4 445,89 kr
Each
Enheter
Phone 220V ac - 2 - 2 - Yes Yes No No Yes
RS-artikelnummer 126-8845
Tillv. art.nrCTC331-WW
VarumärkeSCS
2 850,74 kr
Each
Enheter
Jack 100 → 240V ac 22 mm 1 66mm 1 61mm No No Yes Yes Yes
RS-artikelnummer 700-8843
Tillv. art.nrIZD10-510
VarumärkeSMC
3 702,89 kr
Each
Enheter
Crimp 24V dc 13 mm - 87.5mm - 16.6mm - - - - -
RS-artikelnummer 126-8851
VarumärkeRS PRO
2 756,95 kr
Each
Enheter
Banana 5V dc 30 mm 1 61mm 1 69mm Yes No No Yes Yes
RS-artikelnummer 685-8760
Tillv. art.nrPS604024CG-230
VarumärkeDesco EMIT
803,00 kr
Each
Enheter
- 220V ac - - - - - - - - - Yes
RS-artikelnummer 174-6529
Tillv. art.nr19652
VarumärkeDesco
3 078,84 kr
Each
Enheter
- 100 → 240V ac/dc 23 mm 1 98mm 1 53mm - Yes - - -
Related Products
The SCS ESD grounding cord is the 2300 ...
Description:
The SCS ESD grounding cord is the 2300 series, dual conductor coil card. It has 3.4mm straight mono plug which is designed to use with dual wire wristband and dual wire continuous monitors. If one conductor is damaged, the operator ...
Dual wire wrist strap from Menda. Dual wire ...
Description:
Dual wire wrist strap from Menda. Dual wire wrist strap provides redundancy - even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire. Used with resistive loop technology to continuously monitor and verify ...