O-Ring Tools

O-ring tools are components that help with the installation and functioning of an O-ring. An O-ring is a gasket or seal in the form of a ring with a circular cross section, typically made of rubber and used for swivelling joints.

O-ring gauges

O-ring gauges help to determine the right size of O-ring to use. They have a series of silhouettes to the side of the gauge that identifies small section O-ring sizes. Larger sizes are determined by placing the O-ring around the two halves of the appropriate spindles at the top of the gauge. The slide is then extended and the size number is displayed in a window of the main body of the gauge.

O-ring testers

An O-ring tester is a compact tool that performs a non-destructive field test of an O-ring by releasing a weight that falls to a set distance to indicate the material composition. O-ring testers are typically made from durable stainless steel which allows them to be carried safely in tool boxes.


...
Read more Read less

Filter

Visar 1 - 2 av 2 produkter
Resultat per sida
Beskrivning Pris Type
RS-artikelnummer 705-8961
VarumärkeRS PRO
366,10 kr
Each
Enheter
O-Ring Gauge
RS-artikelnummer 705-8986
VarumärkeRS PRO
1 932,24 kr
Each
Enheter
O-Ring Material Tester
Related Products
The Volkel Go ring gauge M2x0.5 is calibrated ...
Description:
The Volkel Go ring gauge M2x0.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go ring gauge M10x1.5 is calibrated ...
Description:
The Volkel Go ring gauge M10x1.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel No-Go ring gauge M14x2 is calibrated ...
Description:
The Volkel No-Go ring gauge M14x2 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
The Volkel No-Go ring gauge M12x1.75 is calibrated ...
Description:
The Volkel No-Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...