Couplings

Couplings are used to join two shafts together for the purpose of transmitting power.

Couplings can be either material flexing or mechanical flexing.

Typical uses for couplings are motor to pump, motor to gear box and motor to electric actuator.

Factors to consider unless you are replacing a like for like coupling are:

  • Horsepower of the motor
  • RPM
  • BSE (the distance between shaft ends
  • Operating temperature
  • Space available
  • Run cycle
  • Angular, parallel or axial misalignment handling

There are many different types of couplings available and many factors should be considered before deciding on a specific type.

Some of the types of couplings available:

General purpose, backlash free, flexible beam couplings feature multiple helical cuts and are machined from one piece material. They have 0.4 to 12 Nm nominal torque range and reduces wind-up compared to single beam coupling. Flexible beam couplings are used in a variety of motion-control applications, from aviation and lab equipment to robotics and medical devices. A common industrial application arises when a motor is connected to a pump. Factory automation equipment and other machine tools rely on flexible beam couplings to transmit power from a motor source.

Bellows couplings are made of a thin-walled, flexible metal corrugation (bellows) that is connected between two clamping hubs. They are designed to create a low inertia zero-backlash coupling which will last a long time without maintenance. Bellows couplings can accommodate all forms of misalignment and have a balanced design for reduced vibration at high speeds. Theyre best suited for applications where precise positioning is required, such as in material handling or general automation and assembly.

Jaw couplings are used within electrical motor and internal combustion systems to transmit power (torque). They are designed to connect two shafts, enabling smooth torque transmission and reducing loss of power. Jaw couplings work by preventing shock loading (the sudden and drastic increase of load in a system) and/or accommodating shaft misalignment where this has been caused by thermal expansion or manufacturing inefficiencies.


...
Read more Read less

Filter

Visar 1 - 20 av 668 produkter
Resultat per sida
Beskrivning Pris Bore Coupling Types Outside Diameter Length Fastening Type Torque Rating Torsional Stiffness Moment of Inertia Misalignment - Angular Misalignment - Parallel Misalignment - Axial Bellows Material Shore Hardness Suitable For Use With
RS-artikelnummer 423-2194
Tillv. art.nrJD21/33-98R
VarumärkeRuland
52,995 kr
Each (In a Pack of 2)
Enheter
- Curved Jaw Coupling 33.3mm - - - - - 0.8° 0.08mm 0.76mm - 98Shore A 33 mm Hubs
RS-artikelnummer 423-1775
Tillv. art.nrMJC33-12-A
VarumärkeRuland
176,26 kr
Each
Enheter
12mm Curved Jaw Coupling 33.3mm 44.5mm Clamp - - - - - - - - -
RS-artikelnummer 423-1703
Tillv. art.nrMJC19-8-A
VarumärkeRuland
118,31 kr
Each
Enheter
8mm Curved Jaw Coupling 19.1mm 27.2mm Clamp - - - - - - - - -
RS-artikelnummer 423-1769
Tillv. art.nrMJC33-10-A
VarumärkeRuland
176,26 kr
Each
Enheter
10mm Curved Jaw Coupling 33.3mm 44.5mm Clamp - - - - - - - - -
RS-artikelnummer 296-9838
Tillv. art.nrMCLX-10-10-F
VarumärkeRuland
332,56 kr
Each
Enheter
10mm Rigid Coupling 29mm 45mm - - - - - - - - - -
RS-artikelnummer 808-7323
Tillv. art.nrROTEX28-Complete-KTR
VarumärkeKTR
533,92 kr
Each
Enheter
28 → 38mm Curved Jaw Coupling 66mm 90mm - - - - 0.8° 0.25mm -0.7 mm, +1.5 mm - - -
RS-artikelnummer 693-2477
Tillv. art.nr530.20.2222
VarumärkeHuco
159,60 kr
Each
Enheter
6mm Bellows Coupling 20mm 31mm Set Screw 2.27Nm 315Nm/rad 90 x 10^-8kg/m² 0.06mm 0.35mm Stainless Steel - -
RS-artikelnummer 296-9894
Tillv. art.nrMCLX-15-15-F
VarumärkeRuland
358,64 kr
Each
Enheter
15mm Rigid Coupling 34mm 50mm - - - - - - - - - -
RS-artikelnummer 809-0727
Tillv. art.nr047.10.2222.RS
VarumärkeHuco
140,40 kr
Each
Enheter
6mm Double Loop Elastomer - 27mm - 0.5Nm - - 10° - 4.5mm - - -
RS-artikelnummer 808-7301
Tillv. art.nrROTEX24-Complete-KTR
VarumärkeKTR
377,03 kr
Each
Enheter
22 → 28mm Curved Jaw Coupling 56mm 78mm - - - - 0.8° 0.22mm -0.5 mm, +1.4 mm - - -
RS-artikelnummer 693-2414
Tillv. art.nr537.20.2222
VarumärkeHuco
315,72 kr
Each
Enheter
6mm Bellows Coupling 20mm 31mm Clamping 2.33Nm 315Nm/rad 90 x 10^-8kg/m² 0.06mm 0.35mm Stainless Steel - -
RS-artikelnummer 423-1898
Tillv. art.nrJD12/19-92Y
VarumärkeRuland
42,005 kr
Each (In a Pack of 2)
Enheter
- Curved Jaw Coupling 19.1mm - - - - - 0.9° 0.1mm 0.51mm - 92Shore A 19 mm Hubs
RS-artikelnummer 810-0707
VarumärkeRS PRO
191,23 kr
Each
Enheter
10 28mm Gear coupling 44mm - - 45Nm - - 1mm - - - -
RS-artikelnummer 814-629
Tillv. art.nrPSMR25-8-8-A
VarumärkeRuland
306,67 kr
Each
Enheter
- Beam Coupling 25.4mm 31.8mm - 3.73Nm 1.57°/Nm - 0.381mm 0.254mm - - -
RS-artikelnummer 701-9137
Tillv. art.nrMJC41-14-A
VarumärkeRuland
256,76 kr
Each
Enheter
14mm Curved Jaw Coupling 41.3mm 53mm Clamp - - - - - - - - -
RS-artikelnummer 701-9143
Tillv. art.nrJD12/19-85B
VarumärkeRuland
81,085 kr
Each (In a Pack of 2)
Enheter
- Curved Jaw Coupling 19.1mm - - - - - 0.13mm 0.51mm - - -
RS-artikelnummer 810-0694
VarumärkeRS PRO
104,76 kr
Each
Enheter
8 19mm Gear coupling 32mm - - 16Nm - - 1mm - - - -
RS-artikelnummer 808-7266
Tillv. art.nrROTEX14-Complete-KTR
VarumärkeKTR
254,82 kr
Each
Enheter
6 → 16mm Curved Jaw Coupling 30mm 35mm - - - - 1.2° 0.17mm -0.5 mm, +1.0 mm - - -
RS-artikelnummer 489-3761
Tillv. art.nr13005523
VarumärkeLenze
26,22 kr
Each
Enheter
- Straight Jaw Coupling - - - - - - 0.4mm 0.45mm - - -
RS-artikelnummer 693-0871
Tillv. art.nr852.33.28
VarumärkeHuco
208,08 kr
Each
Enheter
8mm Oldham (Sliding disc) 33.3mm - - - - - - - - - - -
Related Products
A range of zero backlash curved jaw couplings. ...
Description:
A range of zero backlash curved jaw couplings. Three piece coupling comprising two aluminium hubs and an elastic insert (spider). Polyurethane spider provides damping of impulse loads, minimising shock to the motor and other sensitive equipment. Offered in two hardness ...
Polyurethane spider provides damping of impulse loads, minimising ...
Description:
Polyurethane spider provides damping of impulse loads, minimising shock to the motor and other sensitive equipment. Offered in two hardness levels the spiders can be used to customise the coupling performance. One complete coupling comprises two aluminium hubs and a ...
Clamp style jaw couplings from Ruland. These couplings ...
Description:
Clamp style jaw couplings from Ruland. These couplings have a large torque capacity and a balanced design. To complete your assembly two hubs must be purchased. A jaw spider must be placed in between these couplings. Please view our essential ...
A range of hubs from KTR for use ...
Description:
A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.