Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filter

Visar 1 - 11 av 11 produkter
Resultat per sida
Beskrivning Pris Supply Voltage Maximum Bore Size Minimum Bore Size
RS-artikelnummer 497-9584
Tillv. art.nrTIH030M 230V
VarumärkeSKF
24 553,96 kr
Each
Enheter
230V ac 300mm 20mm
RS-artikelnummer 448-7164
Tillv. art.nrTMBH 1
VarumärkeSKF
17 900,54 kr
Each
Enheter
100 → 240V ac 100mm 20mm
RS-artikelnummer 732-4726
Tillv. art.nr729659 C
VarumärkeSKF
8 392,44 kr
Each
Enheter
230V ac 100mm -
RS-artikelnummer 845-9564
Tillv. art.nrTIH100M 230V
VarumärkeSKF
36 378,99 kr
Each
Enheter
200 → 240V 400mm 20mm
RS-artikelnummer 680-8018
Tillv. art.nrTIH030M/110V
VarumärkeSKF
25 028,78 kr
Each
Enheter
110V ac 300mm 20mm
Nytt
RS-artikelnummer 183-2647
Tillv. art.nrBH-02S/EUROPE
VarumärkeConemount
14 551,77 kr
Each
Enheter
- - -
Nytt
RS-artikelnummer 183-2646
Tillv. art.nrBH-02C/UK
VarumärkeConemount
10 333,13 kr
Each
Enheter
- - -
Nytt
RS-artikelnummer 183-2641
Tillv. art.nrBH-02B/EUROPE
VarumärkeConemount
9 395,96 kr
Each
Enheter
- - -
Nytt
RS-artikelnummer 183-2649
Tillv. art.nrBH-02S/UK
VarumärkeConemount
14 551,77 kr
Each
Enheter
- - -
Nytt
RS-artikelnummer 183-2643
Tillv. art.nrBH-02C/EUROPE
VarumärkeConemount
10 333,13 kr
Each
Enheter
- - -
Nytt
RS-artikelnummer 183-2642
Tillv. art.nrBH-02B/UK
VarumärkeConemount
9 395,96 kr
Each
Enheter
- - -
Relaterte Produkter
RS Pro Nozzle heaters are designed with the ...
Description:
RS Pro Nozzle heaters are designed with the highest quality materials used for optimal performance. The heaters are most commonly used in the plastic industry but are also suitable to use in applications of up to 1000°F. • High temperature ...
HVR Pentagon anti-condensation heaters have been designed for ...
Description:
HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.