Pneumatic Pin Cylinders

Pneumatic pin (needle) cylinders are compact (space saving) mechanical devices that transform compressed air power into linear forces to drive a mechanical motion. A cylinder consists of a piston, rod and plunger surrounded by a cylindrical bore.

These cylinders occupy less space than other pneumatic cylinders because components like switches can be mounted onto them via panel (on top of device) or embedded mounting (inside device).

Their bodies are made of brass and the rods are constructed of stainless steel for extra durability. They do not require additional lubrication which makes them relatively maintenance free.

What are pneumatic pin cylinders used for?

Pin cylinders are used for precision parts assembling in tight spaces. For example during automated soldering activities where components to be joined (soldered) are located behind panel enclosures and can only be accessed through tiny openings.

Types of pneumatic pin cylinders

  • Single acting means there is one port from where the compressed air flows to push the rod out. The rod is then retracted with a spring mechanism.
  • Double acting means there are two ports from which compressed air can flow out and back in to push and retract the rod.

...
Read more Read less

Filter

Visar 1 - 20 av 49 produkter
Resultat per sida
Beskrivning Pris Manufacturer Series Action Bore Stroke Piston Speed Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Force at 7 bar Port Connection Dimensions Weight Minimum Piston Speed Diameter
RS-artikelnummer 183-3952
Tillv. art.nrCJPB6-10H6
VarumärkeSMC
151,48 kr
Each
Enheter
CJP Single 6mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 34.5 x 12 x 13.9mm 13.1g 50mm/s -
RS-artikelnummer 183-3968
Tillv. art.nrCJPB6-15H6
VarumärkeSMC
149,98 kr
Each
Enheter
CJP Single 6mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 41.5 x 12 x 13.9mm 15.6g 50mm/s -
RS-artikelnummer 890-3250
Tillv. art.nrCDJ2B16-15Z-B
VarumärkeSMC
408,02 kr
Each
Enheter
- Double 16mm 15mm 50 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 90 x 18 x 18mm 55g 50mm/s -
RS-artikelnummer 890-3257
Tillv. art.nrCDJ2B16-45Z-B
VarumärkeSMC
427,35 kr
Each
Enheter
- Double 16mm 45mm 50 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 120 x 18 x 18mm 55g 50mm/s -
RS-artikelnummer 183-3996
Tillv. art.nrCJPB10-15H6
VarumärkeSMC
198,60 kr
Each
Enheter
CJP Single 10mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 46 x 19 x 22mm 38g 50mm/s -
RS-artikelnummer 183-3946
Tillv. art.nrCJPB6-5H6
VarumärkeSMC
151,48 kr
Each
Enheter
CJP Single 6mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 27.5 x 12 x 13.9mm 10.6g 50mm/s -
RS-artikelnummer 547-619
Tillv. art.nrCDJP2B10-5D
VarumärkeSMC
292,83 kr
Each
Enheter
CJP2 Double 10mm 5mm 50 500mm/s 0.7 MPa - Rubber - M3 x 0.5 44.5 x 15 x 19mm 27g 50mm/s -
RS-artikelnummer 547-603
Tillv. art.nrCDJP2B6-10D
VarumärkeSMC
270,03 kr
Each
Enheter
CJP2 Double 6mm 10mm 50 500mm/s 0.7 MPa - Rubber - M3 x 0.5 43 x 14 x 16.5mm 18g 50mm/s -
RS-artikelnummer 547-625
Tillv. art.nrCDJP2B10-15D
VarumärkeSMC
308,03 kr
Each
Enheter
CJP2 Double 10mm 15mm 50 500mm/s 0.7 MPa - Rubber - M3 x 0.5 54.5 x 15 x 19mm 32g 50mm/s -
RS-artikelnummer 264-6153
Tillv. art.nrCJ1B4-15SU4
VarumärkeSMC
185,93 kr
Each
Enheter
CJ1 Single 4mm 15mm 50 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 58mm 5.6g 50mm/s 5mm
RS-artikelnummer 547-528
Tillv. art.nrCDJP2B10-30D
VarumärkeSMC
330,84 kr
Each
Enheter
CJP2 Double 10mm 30mm 50 500mm/s 0.7 MPa - Rubber - M3 x 0.5 69.5 x 15 x 19mm 40g 50mm/s -
RS-artikelnummer 547-629
Tillv. art.nrCDJP2B6-5D
VarumärkeSMC
262,43 kr
Each
Enheter
CJP2 Double 6mm 5mm 50 500mm/s 0.7 MPa - Rubber - M3 x 0.5 38 x 14 x 16.5mm 16g 50mm/s -
Nytt
RS-artikelnummer 200-3544
Tillv. art.nrCJPS6-15
VarumärkeSMC
185,57 kr
Each
Enheter
CJP Single 6mm 15mm - - - - - - - - - -
RS-artikelnummer 264-6169
Tillv. art.nrCJ1B4-20SU4
VarumärkeSMC
190,11 kr
Each
Enheter
CJ1 Single 4mm 20mm 50 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 67mm 13.2g 50mm/s 5mm
RS-artikelnummer 547-530
Tillv. art.nrCDJP2B16-25D
VarumärkeSMC
361,73 kr
Each
Enheter
CJP2 Double 16mm 25mm 50 500mm/s 0.7 MPa - Rubber - M5 x 0.8 68.5 x 20 x 24.5mm 58g 50mm/s -
RS-artikelnummer 183-4006
Tillv. art.nrCJPB15-10H6
VarumärkeSMC
264,46 kr
Each
Enheter
CJP Single 15mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 43.5 x 27 x 31mm 82g 50mm/s -
RS-artikelnummer 838-8800
Tillv. art.nrCDJP2D16-30D
VarumärkeSMC
464,80 kr
Each
Enheter
CJP2 Double 16mm 30mm 10 500mm/s 0.7 MPa 1MPa Rubber 121 (Retract) N, 140.7 (Extend) N - 93 x 22 x 25.5mm 80.2g 10mm/s -
RS-artikelnummer 890-3231
Tillv. art.nrCDJ2B10-15Z-B
VarumärkeSMC
339,57 kr
Each
Enheter
- Double 10mm 15mm 50 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 89 x 12 x 12mm 24g 50mm/s -
RS-artikelnummer 183-4012
Tillv. art.nrCJPB15-15H6
VarumärkeSMC
264,46 kr
Each
Enheter
CJP Single 15mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 50 x 27 x 31mm 92g 50mm/s -
RS-artikelnummer 844-4486
Tillv. art.nrNCDJ2D10-100-B
VarumärkeSMC
319,42 kr
Each
Enheter
NCJ2 Double 9.53mm 25.4mm 50 750mm/s 0.7 MPa 1MPa Rubber - 10-32 UNF 3.91 x 0.47 x 0.47in 50.6g 50mm/s -
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...
Miniature pin cylinders for panel mount. All cylinders ...
Description:
Miniature pin cylinders for panel mount. All cylinders are single acting with spring return. Lubrication not requiredThreaded rod-end styleNon-cushionedProof pressure 10.5 barOperating pressure 2 bar, 6mm dia and 1.5 bar, 10mm/15mm dia (min) 7 bar (max)Ambient and fluid temperature 5°C ...
SMC NCJ2 series of miniature cylinders offer a ...
Description:
SMC NCJ2 series of miniature cylinders offer a stainless steel body and stainless steel rods. They are a compact and lightweight highly accurate pneumatic cylinder. Available in bore sizes 6, 10, 16 mm, and a wide range of stroke lengths. ...