Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.
Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.
Pneumatic systems contain many components, pneumatic manifold tube-to-tube fittings being one example.
What are pneumatic manifold tube-to-tube fittings used for?
Pneumatic manifold tube-to-tube fittings allow a number of tubes to be connected together via a central manifold. They can connect a range of numbers of hoses in a variety of arrangements and orientations.
Types of pneumatic manifold tube-to-tube fittings
Pneumatic manifold tube-to-tube fittings come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.
Description:
These fittings incorporate parallel threads with a pre-assembled
sealing washer, giving instant assembly, security and consistent assembled height. Compact and low profile these banjos give better space utilisation and accessibility. Nitrile O ringsMax operating pressure 20 barTemperature range -20 to ...
Description:
ENOTS compression fittings are ideal for most general
industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
Description:
A range of plugs and gaskets from SMC,
suitable for use with the M5 series miniature fittings. M5 Nickel plated miniature fittings offering a compact and space saving designThe tube has a large retaining force with hose nipples assuring easy ...
Description:
The function fittings of RS Pro have been
designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they respond to the most extreme demand of pneumatic: flow controls, pressure regulators, unidirectional valves, ...