Hydraulic Blanking Plugs

Hydraulic blanking plugs provide a temporary or permanent way of covering holes in high-pressure hydraulic devices. By sealing holes you can help to prevent leaks and ensure the device operates properly. Depending on their material, hydraulic blanking plugs are resistant to corrosion, oil and most chemicals. They have a threaded shaft and a flat head with a washer.

What are hydraulic blanking plugs used for?

Hydraulic blanking plugs are used in high pressure fluid applications such as presses, pumps, cylinders, valves, relays, motors, transmissions and turbos. Any blow-off or fault is prevented with a visible hydraulic bite rings on the progressive ring. Stress is evenly distributed throughout which minimises concentration at the bite point.

How to choose the right hydraulic blanking plugs

Hydraulic systems work at high pressures, applying extreme load and vibration to fittings. When choosing the right hydraulic blanking plugs, the technical specifications should be carefully considered. These factors include maximum temperature and pressure, as well as material. Steel hydraulic blanking plugs have a high resistance to corrosion, and plastic plugs are solvent, oil, grease and chemical resistant.


...
Read more Read less

Filter

Visar 1 - 20 av 37 produkter
Resultat per sida
Beskrivning Pris Material Finish Head Hex Type Thread Length Overall Length Thread Standard Thread Size Maximum Operating Temperature Minimum Operating Temperature Maximum Operating Pressure
RS-artikelnummer 283-3290
Tillv. art.nr58621
VarumärkeElesa-Clayton
9,416 kr
Each (In a Pack of 5)
Enheter
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS-artikelnummer 727-755
Tillv. art.nrVSTI1/2EDCF
VarumärkeParker
47,552 kr
Each (In a Pack of 5)
Enheter
Steel Zinc Plated - 14mm 19.3mm G 1/2in +100°C -30°C 400 bar
RS-artikelnummer 871-2253
Tillv. art.nrVSTI10X1EDCF
VarumärkeParker
30,96 kr
Each
Enheter
Steel Zinc Plated Hollow Hex 8mm 12mm Metric - - - 400 bar
RS-artikelnummer 871-2278
Tillv. art.nrVSTI18x1.5EDCF
VarumärkeParker
52,59 kr
Each
Enheter
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS-artikelnummer 727-749
Tillv. art.nrVSTI3/8EDCF
VarumärkeParker
29,262 kr
Each (In a Pack of 5)
Enheter
Steel Zinc Plated - 12mm 17.3mm G 3/8in +100°C -30°C 400 bar
RS-artikelnummer 914-9501
Tillv. art.nr59727
VarumärkeElesa-Clayton
125,78 kr
Each
Enheter
Aluminium Black Anodised - 11.5mm 44mm G 3/4in +100°C -30°C -
RS-artikelnummer 914-9491
Tillv. art.nr58413
VarumärkeElesa-Clayton
49,30 kr
Each
Enheter
Polyamide Based Technopolymer Matte Hex Plug 15mm 26mm G 1-1/2in +100°C -30°C -
RS-artikelnummer 141-7295
Tillv. art.nr58297-EX
VarumärkeElesa
22,33 kr
1 Pack of 1
Förpackning(ar)
- - - - - - - - - -
RS-artikelnummer 283-3420
Tillv. art.nr58298
VarumärkeElesa-Clayton
14,134 kr
Each (In a Pack of 5)
Enheter
Glass Fibre Reinforced Plastic (GRP) Matte - 12mm 20mm G 3/4in +130°C -30°C -
RS-artikelnummer 498-340
Tillv. art.nr16PNK4S
VarumärkeParker
68,012 kr
Each (In a Pack of 5)
Enheter
Steel Yellow Chromated, Zinc Plated - - - G 1in +120°C -40°C 240 bar
RS-artikelnummer 498-312
Tillv. art.nr6PNK4S
VarumärkeParker
16,254 kr
Each (In a Pack of 5)
Enheter
Steel Yellow Chromated, Zinc Plated Hex Plug - - G 3/8in +120°C -40°C 380 bar
RS-artikelnummer 914-9482
Tillv. art.nr58411
VarumärkeElesa-Clayton
38,93 kr
Each
Enheter
Polyamide Based Technopolymer Matte - 14mm 24mm G 1-1/4in +100°C -30°C -
RS-artikelnummer 283-3329
Tillv. art.nr59791
VarumärkeElesa-Clayton
92,98 kr
Each
Enheter
Aluminium Matte Anodised - 9mm 15.5mm G 1/4in +130°C -30°C -
RS-artikelnummer 283-3313
Tillv. art.nr58641
VarumärkeElesa-Clayton
17,096 kr
Each (In a Pack of 5)
Enheter
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS-artikelnummer 914-9505
Tillv. art.nr59729
VarumärkeElesa-Clayton
140,91 kr
Each
Enheter
Aluminium Black Anodised - 11.5mm 44mm G 1in +100°C -30°C -
RS-artikelnummer 871-2265
Tillv. art.nrVSTI14x1.5EDCF
VarumärkeParker
40,02 kr
Each
Enheter
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS-artikelnummer 914-9494
Tillv. art.nr59721
VarumärkeElesa-Clayton
83,05 kr
Each
Enheter
Aluminium Black Anodised - 9mm 37.5mm G 1/4in +100°C -30°C -
RS-artikelnummer 141-7296
Tillv. art.nr58298-EX
VarumärkeElesa
26,06 kr
1 Pack of 1
Förpackning(ar)
- - - - - - - - - -
RS-artikelnummer 283-3335
Tillv. art.nr59801
VarumärkeElesa-Clayton
94,05 kr
Each
Enheter
Aluminium Matte Anodised - 9mm 15.5mm G 3/8in +130°C -30°C -
RS-artikelnummer 914-9508
Tillv. art.nr59725
VarumärkeElesa-Clayton
99,96 kr
Each
Enheter
Aluminium Black Anodised - 11mm 41.5mm G 1/2in +100°C -30°C -
Related Products
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Blanking plugs for ports, male metric thread. Manufactured ...
Description:
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, ...
Description:
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finishPlugs have k protection degree and can therefore be mounted in equipments protected by means of immersion in liquid, without loweringprotection degree.