Ferrite Beads

"

Ferrite Beads also known as ferrite chokes are passive devices and they are used to constrict high-frequency signals in electronic components. The ferrite becomes resistive over its intended frequency range and uses up the noise energy in the form of heat.

How do the ferrite beads work?

The ferrite bead is connected in series with the power supply rail and is often combined with the capacitors to ground on either side of the bead. This then forms a low-pass filter network, further reducing the high-frequency power supply noise. Use SPICE (Simulation Program with Integrated Circuit Emphasis) or another similar tool to ensure any anti-resonance peaks caused by ferrite or PCB inductive structure does not violate the target impedance limit.

Ferrite Beads come in two categories:

High-Q Beads - typically used as resonators and must not be used in power isolation circuits

Low-Q Beads - these are also called absorptive beads and they are lossy and make good filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat

What to consider when choosing Ferrite Beads?

Make sure that any voltage drop does not cause the target supply rail to fall below the recommended operating conditions of the device

The ferrite bead is inductive, therefore do not use it with High-Q decoupling capacitors

Applying ferrite beads correctly can be an effective and inexpensive way to reduce high-frequency noise and switching transients

Where are Ferrite Beads used?

Eliminating high-frequency EMI noise on any circuit design

Electronic devices such as mobile phones

Computers and laptops

TV tuners

Audio Players

DVDs

Gaming Systems

"

...
Read more Read less

Filter

Visar 61 - 80 av 1129 produkter
Resultat per sida
Beskrivning Pris Package Type Impedance at 25 MHz Impedance at 100 MHz Impedance at 300 MHz Impedance at 500 MHz Impedance at 1 GHz Current Rating Type Dimensions Length Depth Height Diameter Application
RS-artikelnummer 724-1403
Tillv. art.nrBLM18PG300SN1D
VarumärkeMurata
0,513 kr
Each (In a Pack of 25)
Enheter
0603 (1608M) - 30Ω - - - 1A Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, Power Supplies
RS-artikelnummer 888-3128
Tillv. art.nrHZ0603C651R-10
VarumärkeLaird Technologies
0,532 kr
Each (In a Pack of 500)
Enheter
0603 (1608M) 296Ω 650Ω - - 652Ω 300mA Chip Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Automotive, DSC, Energy and Utilities, General Electronics, Laptop, LCD-TV, Networking Devices, PC, Portable Devices etc., Security
RS-artikelnummer 188-8659
Tillv. art.nrBLM41PG750SN1L
VarumärkeMurata
2,688 kr
Each (In a Pack of 10)
Enheter
1806 (4516M) - 75Ω - - - 3.5A Chip Ferrite Bead 4.5 x 1.6 x 1.6mm 4.5mm 1.6mm 1.6mm - Power Supplies
RS-artikelnummer 177-6254
Tillv. art.nrBLM41PG750SN1L
VarumärkeMurata
1,041 kr
Each (On a Reel of 4000)
Enheter
1806 - 75Ω - - - 3.5A Filter 4.5 x 1.6 x 1.6mm 4.5mm 1.6mm 1.6mm - EMI Suppression, Power Line
RS-artikelnummer 899-7286
Tillv. art.nr74275143
VarumärkeWurth Elektronik
10,402 kr
Each (In a Bag of 5)
Enheter
Radial 920Ω 961Ω - - - 3A Ferrite Bead 6 (Dia.) x 10mm - - 10mm 6mm Protection Against Radio Frequency Interferences of Components on PCB's of PC's, Text Processing and Other Digital Devices
RS-artikelnummer 870-9317
Tillv. art.nrZ0402C121ESMST
VarumärkeKEMET
0,364 kr
Each (In a Pack of 10000)
Enheter
0402 (1005M) - 120Ω - - - 450mA Multilayer Chip Bead 25.4 x 12.7 x 12.7mm 25.4mm 12.7mm 12.7mm - Digital Product Clock Lines, High Frequency Noise Counter, LSI Power Supplies, Mobile Devices, Noise Suppression, Signal Line
RS-artikelnummer 202-3550
Tillv. art.nrBLM18AG121SN1D
VarumärkeMurata
0,372 kr
Each (In a Pack of 20)
Enheter
0603 (1608M) - 120Ω - - - 500mA Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, General Use
RS-artikelnummer 144-9785
Tillv. art.nr742792651
VarumärkeWurth Elektronik
0,893 kr
Each (On a Reel of 4000)
Enheter
603 - 600Ω - - - 1A Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Anti EMI, Control Signals, DC/DC Converter, Fast Bus Signals, HDD, High Current, High Frequency, High Speed, Line Filter, LVDS, Power Supply, RS232, RS422, USB 2.0
RS-artikelnummer 888-3478
Tillv. art.nr28B0735-000
VarumärkeLaird Technologies
6,485 kr
Each (In a Pack of 50)
Enheter
0735 135Ω 250Ω 400Ω - - - Cylindrical EMI Core 18.67 x 28.58mm 28.58mm - - 18.67mm EMI Suppression
RS-artikelnummer 124-1839
Tillv. art.nr742792040
VarumärkeWurth Elektronik
1,925 kr
Each (In a Pack of 50)
Enheter
0805 (2012M) - 600Ω - - - 2A Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Anti EMI, Control Signals, DC/DC Converter, Fast Bus Signals, HDD, High Current, High Frequency, High Speed, Line Filter, LVDS, Power Supply, RS232, RS422, USB 2.0
RS-artikelnummer 144-9871
Tillv. art.nr742792620
VarumärkeWurth Elektronik
0,811 kr
Each (On a Reel of 4000)
Enheter
0603 - 100Ω - - - 500mA EMI Suppression 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Suppression Components
RS-artikelnummer 747-4710
Tillv. art.nrBLM18KG121TN1D
VarumärkeMurata
0,297 kr
Each (In a Bag of 100)
Enheter
0603 (1608M) - 120Ω - - - 3A Chip Ferrite Bead 1.6 x 0.8 x 0.6mm 1.6mm 0.8mm 0.6mm - EMI Suppression Filter, GHz Band Digital Interface
RS-artikelnummer 110-643
Tillv. art.nrBLM18EG471SN1D
VarumärkeMurata
0,62 kr
Each (In a Bag of 25)
Enheter
0603 (1608M) - 470Ω - - - 500mA Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, GHz Band General Use (Low DC Resistance Type)
RS-artikelnummer 724-1277
Tillv. art.nrBLM15HD102SN1D
VarumärkeMurata
0,654 kr
Each (In a Pack of 25)
Enheter
0402 (1005M) - 1000Ω - - - 250mA Chip Ferrite Bead 1 x 0.5 x 0.5mm 1mm 0.5mm 0.5mm - EMI Suppression Filter, GHz Band High-speed Signal Lines
RS-artikelnummer 724-1251
Tillv. art.nrBLM15AG102SN1D
VarumärkeMurata
0,488 kr
Each (In a Pack of 25)
Enheter
0402 (1005M) - 1000Ω - - - 300mA Chip Ferrite Bead 1 x 0.5 x 0.5mm 1mm 0.5mm 0.5mm - EMI Suppression Filter, General Use
RS-artikelnummer 125-3153
Tillv. art.nrBLM21AG601SN1D
VarumärkeMurata
0,315 kr
Each (On a Reel of 4000)
Enheter
0805 (2012M) - 600Ω - - - 700mA Chip Bead 2 x 1.25 x 0.85mm 2mm 1.25mm 0.85mm - EMI Suppression, General Electronics
RS-artikelnummer 144-9818
Tillv. art.nr742792514
VarumärkeWurth Elektronik
2,342 kr
Each (On a Reel of 1000)
Enheter
1812 - 600Ω - - - 3A - 4.5 x 3.2 x 1.5mm 4.5mm 3.2mm 1.5mm - General Electronics
RS-artikelnummer 172-9954
Tillv. art.nr2743002112
VarumärkeFair-Rite
0,674 kr
Each (On a Reel of 4500)
Enheter
Axial 88Ω 133Ω - - - - Bead 3.5 (Dia.) x 8.9mm 8.9mm - - 3.5mm EMI Suppression
RS-artikelnummer 888-3446
Tillv. art.nr28B0500-100
VarumärkeLaird Technologies
0,912 kr
Each (In a Pack of 500)
Enheter
0500 33Ω 83Ω 200Ω - - - Cylindrical EMI Core 12.7 x 6.35mm 6.35mm - - 12.7mm EMI Suppression
RS-artikelnummer 125-3119
Tillv. art.nrBLM41PG750SN1L
VarumärkeMurata
1,041 kr
Each (On a Reel of 2500)
Enheter
1806 (4516M) - 75Ω - - - 3.5A Chip Bead 4.5 x 1.6 x 1.6mm 4.5mm 1.6mm 1.6mm - Power Supplies
Related Products
Supplied taped and reeled to IEC 60286-1 and ...
Description:
Supplied taped and reeled to IEC 60286-1 and EIA Standard RS-296-F, 4500 pieces on a 14in reel, inside tape spacing is 52.4±1.5mmOxygen free high conductivity copper wire with a tin/lead coating and 3.5m(Ω)maximum resistanceTemperature range -55°C to +125°C.
Multi-aperture cores are used in balun (balance-unbalance) transformersApplications ...
Description:
Multi-aperture cores are used in balun (balance-unbalance) transformersApplications as broadband transformers in communication and CATV circuitsAlso employed in auto air bag circuits to guard against accidental activation.
Excellent anti-EMI properties and low DC resistancePlaced very ...
Description:
Excellent anti-EMI properties and low DC resistancePlaced very close next to the interference source even with smallest size 0402, maximum impedance 1000ΩReliable Ni-Sn electrodes Ideal for data line filtering and voltage de-couplingHigh rated current up to 6A Recommended for reflow ...
This is a multilayered chip bead product which ...
Description:
This is a multilayered chip bead product which is magnetically shielded, allowing high density mountingReduced floating capacity between conductors has contributed to a dramatic improvement in high frequency characteristicsThe EMI suppression provided extends into the GHz rangeApplication include removal of ...