Powered Mixers

A powered mixer is an all in one amplifier and mixer. Combining the two means there is less to carry when travelling, the overall setup is less complicated and the components are perfectly matched. Sound can be played with the mixer directly connected to speakers. In cases where the same equipment is always connected, powered mixers can be used by simply turning the power on, so operation is simplified and convenient.Input channelsThe number of input channels in a mixer is extremely important, as this indicates the number of microphone and musical instrument signals that can be handled. In addition to the number of input channels in a mixer, it is also important to consider such factors as how many of those input channels are for microphones, whether line input channels are monaural only, and whether inputs will accept stereo signals. OutputMixers can output various separate channels of audio, depending on the needs of the event, such as sending audio meant for the audience to the main speakers and audio meant for the performers to the monitor speakers on stageAUX busThe aux bus is a circuit used to send signals to external devices. It can be used to send signals to performers' monitor speakers separately from the main output, or to send signals to external effects and recording devices.GROUP busThe group bus is a circuit for controlling multiple channels at once. For example, if there are eight microphones (for eight channels) placed around a drum set and you want to raise or lower the volume of the entire set, it would be difficult to accurately raise or lower the faders for all eight channels. If these channels are all set to a single group, the volume of the entire drum set can be raised or lowered, while maintaining the same balance, merely by raising or lowering the fader for the group.STEREO busThe stereo bus is a circuit for combining each input coming into the mixer or each group bus signal, adjusting the overall level, and outputting the audio through stereo output connectors.

...
Read more Read less

Filter

Visar 1 - 3 av 3 produkter
Resultat per sida
Beskrivning Pris Rated Power Output Microphone Inputs Phantom Power Frequency Response Plug Type Weight Depth Height Maximum Frequency Response Minimum Frequency Response Width Minimum Operating Voltage Operating Voltage
RS-artikelnummer 425-4447
VarumärkeRS PRO
1 334,79 kr
Each
Enheter
15 W 2 - 100 Hz → 13 kHz - 3.6kg 230mm 83mm 13 kHz 100 Hz 320mm 240 V ac 240 V ac
RS-artikelnummer 522-850
Tillv. art.nrA1724
VarumärkeTOA
6 452,43 kr
Each
Enheter
240 W 6 Yes 50 Hz → 20 kHz Type G 13.5kg 367mm 107.7mm 20 kHz 50 Hz 420mm 240 V ac 240 V ac
RS-artikelnummer 522-840
Tillv. art.nrA1712
VarumärkeTOA
4 299,69 kr
Each
Enheter
120 W 6 Yes 50 Hz → 20 kHz Type G 12.6kg 367mm 107.7mm 20 kHz 50 Hz 420mm 240 V ac 240 V ac
Related Products
Self contained electronics eliminate the need for external ...
Description:
Self contained electronics eliminate the need for external power modules.
A threaded microphone mounting plate used in conjunction ...
Description:
A threaded microphone mounting plate used in conjunction with gooseneck microphones and any lightweight microphones.Gooseneck microphones (809-1199, 809-1180)Ideal for microphones mounted on lecterns, pulpits, conference tables and similar surfaces. Isolating mounted microphones from impact vibration and ...
The XLR Mount Gooseneck Microphone is designed for ...
Description:
The XLR Mount Gooseneck Microphone is designed for high quality sound reinforcement and other situations where sound pick up is difficult. Wide range condenser microphone with cardiod polar patternSmall diameter gooseneck designHighly flexible positioningEasy to manipulate into positionSmooth and quiet ...
The PGA57 microphone is ideal for use in ...
Description:
The PGA57 microphone is ideal for use in amplified instrument, acoustic drum performance and recording. Cardioid polar pattern picks up audio from the source rejecting unwanted noise. Professional microphoneTailor made microphone cartridge for clear sound source reproductionBlack metallic finishStand adapter ...