D-sub Connector Backshells

The D-subminiature or D-sub connector is a type of electronic connector commonly found in computing hardware. A D-sub connector backshell fits over a D-sub connector in order to protect and handle it safely. Backshells can also change the orientation of the connector and are available in a range of sizes, materials and colours to suit your application.

What are D-sub connector backshells used for?

The D-sub connector backshell stabilises the connector and prevents damage from straining on the cables to which the connector is attached. The backshells are often colour-coded or labelled so they can be easily identified when connected to large modular boards.

Types of D-sub connector backshells

Backshells are available in a variety of different designs. The main type of D-sub connector backshell is the screw type connector. These ensure that the D–sub connector is firmly fixed in place when connected.

D-sub connector backshells can be used to change the orientation of the connection and allow the connectors to be tailored to the application in which they will be used. This enables connections to be made when the space available is restricted.


...
Read more Read less

Filter

Visar 1101 - 1105 av 1105 produkter
Resultat per sida
Beskrivning Pris Number of Contacts D-Sub Shell Size Housing Material Body Orientation D Connector Type Colour Housing Material Plating Strain Relief IP Rating Series
RS-artikelnummer 2509099352
Tillv. art.nr17E-1657-09
VarumärkeAmphenol
52,39 kr
Each
Enheter
- - - - - - - - - -
RS-artikelnummer 2509190613
Tillv. art.nrC88E301000
17,29 kr
Each
Enheter
- - - - - - - - - -
RS-artikelnummer 2509285604
Tillv. art.nrC88E301004
12,51 kr
Each
Enheter
- - - - - - - - - -
RS-artikelnummer 2508390455
Tillv. art.nrL17-DTZK-25KFM
VarumärkeAmphenol
97,76 kr
Each
Enheter
- - - - - - - - - -
RS-artikelnummer 2509099469
Tillv. art.nr17E-1727-1
VarumärkeAmphenol
33,15 kr
Each
Enheter
- - - - - - - - - -
Relaterte Produkter
Shielded right angled adapters with zinc diecast hoods ...
Description:
Shielded right angled adapters with zinc diecast hoods and tin plated D-Sub connectors. Nickel plated brass 4-40 UNC-2B mounting screws. Pre-mounted screwsGood electrical properties by using 1 piece contactsNo loose component partsGood shielding properties.
A range of D-connector nut plates that offer ...
Description:
A range of D-connector nut plates that offer additional strength and support to D-connector shells that are without threaded inserts, when panel mounted.The D-connector nut plates feature M3 x 0.5mm thread inserts of passivated steel and an Aluminium body with ...
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
These backshells are ideally suited for use with ...
Description:
These backshells are ideally suited for use with ITT Cannon D*JK filter 'D' connectorsThey provide an excellent solution for the D*W series as depth of the shell accommodates the extended insulator length of this rangeEMI/RFI shielding obtained with integrated shielding ...