Stepper Motors

A stepper motor is used as an output in electronic circuits. The motor is a brushless DC electric motor that divides a full rotation into a number of equal steps.

The motor’s position can then be made to move and hold at one of these steps without any position sensor for feedback as long as the motor is carefully sized to the application in respect to torque and speed.

Multiple coils are organised in phases (groups). By energising each phase in sequence the motor will rotate, one step at a time.

Why and when to use a Stepper Motor?

With a computer controlled stepping you can achieve very precise positioning and/or speed control.
•Steppers move in precise repeatable steps, they are perfect to use where precise positioning is needed such as 3D printers, CNC and camera platforms.


•Some disk drives use stepper motors to position the read/write head.


•Precise increments of movement also allow for excellent control of rotational speed for process automation and robotics.


•A Stepper motor has maximum torque at low speeds, so they are a good choice for applications where low speed with high precision is needed.



Stepper motor types
•Bipolar drivers use H bridge circuitry to reverse the current flow through the phases. By energising the phases with alternating the polarity all the coils can be put to work turning the motor.


•Permanent magnet motors use a permanent magnet in the rotor. They operate based on the principle that minimum reluctance occurs with minimum gap, meaning the rotor points are attracted towards the stator magnet poles.


•Unipolar drivers always energise the groups in the same way. The common lead will always be negative. They can be implemented with simple transistor circuitry.



Advantages of step motors
•Low cost


•High reliability


•High torque at low speed


•Full torque at standstill

...
Read more Read less

Filter

Visar 41 - 60 av 174 produkter
Resultat per sida
Beskrivning Pris Step Angle Holding Torque Number Of Wires Voltage Rating Frame Size Stepper Motor Type Shaft Diameter Current Rating Winding Arrangement Shaft Length Depth Number of Pole Pairs Resistance Per Phase Detent Torque
RS-artikelnummer 191-8362
VarumärkeRS PRO
638,18 kr
Each
Enheter
1.8° 0.88Nm 8 5.4 V dc 56.4 x 56.4mm Hybrid 6.35mm 1.4 A - 116.6mm 76mm - 3.6Ω -
RS-artikelnummer 180-5288
VarumärkeRS PRO
747,38 kr
Each
Enheter
1.8° - 6 7.4 V 56.4 x 56.4mm Hybrid 6.35mm 1 A Unipolar 19mm 56mm - 7.4Ω -
RS-artikelnummer 918-0837
VarumärkeRS PRO
281,14 kr
Each
Enheter
7.5° 36mNm 2 12 V 59.8mm Permanent Magnet 3mm - Unipolar 7mm 31mm - 251Ω -
RS-artikelnummer 180-5280
VarumärkeRS PRO
439,76 kr
Each
Enheter
1.8° - 6 4 V 56.4 x 56.4mm Hybrid 6.35mm 1.1 A Unipolar 19mm 41mm - 3.6Ω -
RS-artikelnummer 180-5279
VarumärkeRS PRO
346,08 kr
Each
Enheter
1.8° - 6 12 V 42.3 x 42.3mm Hybrid 5mm 310 mA Unipolar 22mm 33mm - 38.5Ω -
RS-artikelnummer 892-8735
VarumärkeRS PRO
947,97 kr
Each
Enheter
1.8° 0.78Nm 8 2.1 V, 3 V, 4.2 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 69mm 1 1.5Ω -
RS-artikelnummer 829-3525
Tillv. art.nr103H7126-5740
VarumärkeSanyo Denki
735,83 kr
Each
Enheter
1.8° 1.6Nm 4 24 V dc 56 x 56mm Hybrid 6.35mm 2 A Bipolar 19.1mm 77.3mm - -
RS-artikelnummer 351-4625
Tillv. art.nrP542-M481U-G11L82
720,95 kr
Each
Enheter
7.5° 1.0Nm 6 5 V dc - Permanent Magnet 4mm 550 mA Unipolar 17.2mm 25mm 2 9.1Ω -
RS-artikelnummer 877-7238
Tillv. art.nrSTM23Q-2RE
9 888,87 kr
Each
Enheter
1.8° 0.88Nm 8 12 → 70 V dc 23mm Dual Hybridge 6.35mm 5 A - 18.4mm 92.4mm - - -
RS-artikelnummer 877-7247
Tillv. art.nrSTM23IP-2EE
10 659,09 kr
Each
Enheter
1.8° 0.88Nm 8 12 → 70 V dc 42mm Dual Hybridge 6.35mm 5 A - 18.4mm 92.4mm - - -
RS-artikelnummer 829-3538
Tillv. art.nrSS2421-5041
VarumärkeSanyo Denki
549,46 kr
Each
Enheter
1.8° 83mNm 4 24 V dc 42 x 42mm Hybrid 5mm 1 A Bipolar 7mm 11.6mm - 3.5Ω -
RS-artikelnummer 829-3522
Tillv. art.nr4835728-1
VarumärkeSanyo Denki
28,70 kr
Each
Enheter
- - 4 - - Bipolar, Unipolar - - Unipolar - - - - -
RS-artikelnummer 878-7752
Tillv. art.nr103H5208-0410
VarumärkeSanyo Denki
429,92 kr
Each
Enheter
1.8° 0.30Nm 6 24 V dc 42 x 42mm Bipolar, Unipolar 5mm 1.2 A Unipolar 22.5mm 40.5mm - 2.9Ω -
RS-artikelnummer 878-7761
Tillv. art.nr103H5208-5210
VarumärkeSanyo Denki
429,92 kr
Each
Enheter
1.8° 0.39Nm 4 24 V dc 42 x 42mm Bipolar, Unipolar 5mm 1 A Bipolar 22.5mm 40.5mm - 4.1Ω -
RS-artikelnummer 829-3500
Tillv. art.nr103H5210-5240
VarumärkeSanyo Denki
485,35 kr
Each
Enheter
1.8° 0.51Nm 4 24 V dc 42 x 42mm Hybrid 5mm 1 A Bipolar 22.5mm 49.5mm - 4.8Ω -
RS-artikelnummer 892-9158
Tillv. art.nrP110-064-015.12
VarumärkePortescap
1 602,27 kr
Each
Enheter
15° 7mNm 4 - - Disc Magnet - 650 mA Bipolar - - 1 - 1mNm
RS-artikelnummer 878-7673
Tillv. art.nr103H7823-1740
VarumärkeSanyo Denki
989,96 kr
Each
Enheter
1.8° 2.7Nm 4 24 V dc 60 x 60mm Single Shaft 8mm 4 A Bipolar 19.1mm 87.3mm - 2.4Ω -
RS-artikelnummer 877-7222
Tillv. art.nrSTM17S-3AN
4 904,16 kr
Each
Enheter
1.8° 0.48Nm 8 12 → 48 V dc 17mm Dual Hybridge 5mm 2 A - 22mm 81mm - - -
RS-artikelnummer 878-7768
Tillv. art.nr103H7123-0440
VarumärkeSanyo Denki
626,67 kr
Each
Enheter
1.8° 0.83Nm 6 24 V dc 56 x 56mm Single Shaft 6.35mm 2 A Unipolar 19.1mm 55.3mm - 1.6Ω -
RS-artikelnummer 455-2549
Tillv. art.nr53467
VarumärkeJohnson Electric
248,00 kr
Each
Enheter
7.5° 3mNm - 12 V dc 36mm Bipolar, Unipolar - - Unipolar - - 2 - -
Related Products
Unipolar hybrid stepper motors from RS PRO are ...
Description:
Unipolar hybrid stepper motors from RS PRO are high performance DC motors, perfect for applications requiring precise movement or rotation in steps. They combine characteristics from both VR (variable reluctance) stepper motors and PM (permanent magnet) stepper motors, offering a ...
Hybrid stepper motors from RS PRO are high ...
Description:
Hybrid stepper motors from RS PRO are high performance DC motors, perfect for applications requiring precise movement or rotation in steps. They combine characteristics from both VR (variable reluctance) stepper motors and PM (permanent magnet) stepper motors, offering a versatile ...
RS Pro stepper motors with 6 or 8 ...
Description:
RS Pro stepper motors with 6 or 8 lead configuration. High quality High reliability Innovative Advanced technology Low noise and low vibration Proper torque Smooth run.
A range of McLennan permanent magnet stepper motors ...
Description:
A range of McLennan permanent magnet stepper motors that uses the simplest of designs and techniques to create an effective solution for many applications, where reasonable accuracy and moderate torque are required. Generally large frame size motors deliver more torque. ...