Stepper Motors

A stepper motor is used as an output in electronic circuits. The motor is a brushless DC electric motor that divides a full rotation into a number of equal steps.

The motor’s position can then be made to move and hold at one of these steps without any position sensor for feedback as long as the motor is carefully sized to the application in respect to torque and speed.

Multiple coils are organised in phases (groups). By energising each phase in sequence the motor will rotate, one step at a time.

Why and when to use a Stepper Motor?

With a computer controlled stepping you can achieve very precise positioning and/or speed control.
•Steppers move in precise repeatable steps, they are perfect to use where precise positioning is needed such as 3D printers, CNC and camera platforms.


•Some disk drives use stepper motors to position the read/write head.


•Precise increments of movement also allow for excellent control of rotational speed for process automation and robotics.


•A Stepper motor has maximum torque at low speeds, so they are a good choice for applications where low speed with high precision is needed.



Stepper motor types
•Bipolar drivers use H bridge circuitry to reverse the current flow through the phases. By energising the phases with alternating the polarity all the coils can be put to work turning the motor.


•Permanent magnet motors use a permanent magnet in the rotor. They operate based on the principle that minimum reluctance occurs with minimum gap, meaning the rotor points are attracted towards the stator magnet poles.


•Unipolar drivers always energise the groups in the same way. The common lead will always be negative. They can be implemented with simple transistor circuitry.



Advantages of step motors
•Low cost


•High reliability


•High torque at low speed


•Full torque at standstill

...
Read more Read less

Filter

Visar 1 - 20 av 177 produkter
Resultat per sida
Beskrivning Pris Step Angle Holding Torque Number Of Wires Voltage Rating Frame Size Stepper Motor Type Shaft Diameter Current Rating Winding Arrangement Shaft Length Depth Number of Pole Pairs Resistance Per Phase Detent Torque
RS-artikelnummer 892-8739
VarumärkeRS PRO
1 317,01 kr
Each
Enheter
1.8° 1.17Nm 8 2.52 V, 3.6 V, 5.04 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 80mm 1 1.8Ω -
RS-artikelnummer 535-0372
VarumärkeRS PRO
477,81 kr
Each
Enheter
0.9° 2.2mNm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.33 A - 22mm 33mm - 2.1Ω -
RS-artikelnummer 892-8726
VarumärkeRS PRO
870,73 kr
Each
Enheter
1.8° 30mNm 4 4.32 V 20.2 x 20.2mm Hybrid, Permanent Magnet 4mm 800 mA - 5mm 48.5mm 1 5.4Ω -
RS-artikelnummer 535-0401
VarumärkeRS PRO
580,18 kr
Each
Enheter
0.9° 0.44Nm 4 2.8 V 42.3 x 42.3mm Hybrid 5mm 1.68 A - 24mm 47mm - 1.65Ω -
RS-artikelnummer 440-464
VarumärkeRS PRO
1 113,10 kr
Each
Enheter
1.8° 1.2Nm 8 3 V dc 82.6 x 82.6mm Hybrid 9.5mm 2 A Unipolar 121.4mm 62.5mm - 1.5Ω -
RS-artikelnummer 892-8732
VarumärkeRS PRO
347,94 kr
Each
Enheter
1.8° 0.36Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.68 A - 22mm 62mm 1 1.65Ω -
RS-artikelnummer 535-0467
VarumärkeRS PRO
326,85 kr
Each
Enheter
1.8° 0.22Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.33 A - 22mm 33mm - 2.1Ω -
RS-artikelnummer 535-0445
VarumärkeRS PRO
1 029,66 kr
Each
Enheter
1.8° 1.89Nm 4 3.2 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A - 19mm 76mm - 1.13Ω 72mNm
RS-artikelnummer 535-0489
VarumärkeRS PRO
404,50 kr
Each
Enheter
1.8° 0.44Nm 4 2.8 V 42.3 x 42.3mm Hybrid, Permanent Magnet 5mm 1.68 A - 22mm 47mm - 1.65Ω -
RS-artikelnummer 892-8741
VarumärkeRS PRO
2 280,28 kr
Each
Enheter
1.8° 2.2Nm 8 4.17 V, 6 V, 8.4 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 110mm 1 -
RS-artikelnummer 535-0344
VarumärkeRS PRO
735,79 kr
Each
Enheter
1.8° 60mNm 4 3.8 V 28 x 28mm Hybrid, Permanent Magnet 5mm 670 mA - 18mm 32mm - 5.6Ω -
RS-artikelnummer 535-0502
VarumärkeRS PRO
845,71 kr
Each
Enheter
0.9° 1.26Nm 4 2.5 V 56.4 x 56.4mm Hybrid, Permanent Magnet 6.35mm 2.8 A Unipolar 19mm 56mm - 0.9Ω -
RS-artikelnummer 892-8748
VarumärkeRS PRO
1 535,80 kr
Each
Enheter
1.8° 1.5Nm 8 3.36 V, 4.8 V, 6.72 V 60 x 60mm Hybrid, Permanent Magnet 7.5mm 2 A Parallel, Series, Unipolar 22.4mm 89mm 1 2.4Ω -
RS-artikelnummer 440-470
VarumärkeRS PRO
1 416,06 kr
Each
Enheter
1.8° 2.2Nm 8 2.5 V dc 82.6 x 82.6mm Hybrid 9.5mm 4.5 A - 152.9mm 94mm - 0.56Ω -
RS-artikelnummer 798-3643
VarumärkeRS PRO
1 442,84 kr
Each
Enheter
1.8° 1.76Nm 6 5.1 V dc 56.4 x 56.4mm Bipolar, Unipolar 6.35mm 3 A Unipolar 139.6mm 103mm - 1.7Ω -
RS-artikelnummer 892-8723
VarumärkeRS PRO
735,79 kr
Each
Enheter
1.8° 0.21Nm 4 9 V 39.2 x 39.2mm Hybrid, Permanent Magnet 5mm 600 mA - 22mm 58mm 1 15Ω -
RS-artikelnummer 892-8754
VarumärkeRS PRO
1 437,05 kr
Each
Enheter
1.8° 98mNm 4 1.85 V 40 x 34.05mm Hybrid 3mm 500 mA - 10mm 19.4mm 1 3.7Ω -
RS-artikelnummer 535-0366
VarumärkeRS PRO
1 066,67 kr
Each
Enheter
1.8° 0.12Nm 4 6.2 V 28 x 28mm Hybrid, Permanent Magnet 5mm 670 mA - 18mm 51mm - 9.2Ω -
RS-artikelnummer 892-8729
VarumärkeRS PRO
441,52 kr
Each
Enheter
1.8° 65mNm 4 2.64 V 39.2 x 39.2mm Hybrid, Permanent Magnet 5mm 400 mA - 22mm 44mm 1 6.6Ω -
RS-artikelnummer 918-0837
VarumärkeRS PRO
281,14 kr
Each
Enheter
7.5° 36mNm 2 12 V 59.8mm Permanent Magnet 3mm - Unipolar 7mm 31mm - 251Ω -
Related Products
These motors provide a higher level of torque ...
Description:
These motors provide a higher level of torque compared with many similar motors, up to 100% moreThey may be used in either unipolar or bipolar modesIndustry standard footprint and configuration enables these motors to replace existing ones2 operating voltages available. ...
A permanent magnet 5V stepper motor fitted with ...
Description:
A permanent magnet 5V stepper motor fitted with an ovoid gearhead, which provides a rotational speed reduction and increased torque output. Ideal for applications where digital control of speed and position is requiredGearbox utilises metal gears for optimum torque transmission. ...
A range of McLennan permanent magnet stepper motors ...
Description:
A range of McLennan permanent magnet stepper motors that uses the simplest of designs and techniques to create an effective solution for many applications, where reasonable accuracy and moderate torque are required. Generally large frame size motors deliver more torque. ...
Sany Denki range of Stepper Motors providing the ...
Description:
Sany Denki range of Stepper Motors providing the user with a comprehensive range of options to ensure your application is covered. Offered in both Unipolar & Bipolar winding optionsSingle round and double round shaft designs with adequate length providing the ...