Martindale IN2102 Insulation & Continuity Tester, 250V Min, 1000V Max, 5000MΩ Max, CAT III 600V - UKAS Calibration
- RS-artikelnummer:
- 426-443
- Tillv. art.nr:
- MARIN2102
- Tillverkare / varumärke:
- Martindale
Denna produkt har utgått
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
- RS-artikelnummer:
- 426-443
- Tillv. art.nr:
- MARIN2102
- Tillverkare / varumärke:
- Martindale
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- TW
Produktdetaljer
Triple Voltage Insulation and Continuity Tester Martindale IN2102
A fully specified insulation tester with 250V, 500V & 1000V insulation tests that provides accurate testing and is ideal for single handed operation. The output test voltage is automatically displayed during testing and confirms that the desired test voltage is being developed. The automatic zero adjust removes the resistance of the leads and the test button can be set to be either latching, to give a permanent output, or "press to test".
250V,500V & 1000V insulation test voltages
200mA continuity test current with buzzer below 30Ω
5,000 count backlit digital display with analogue bargraph
Displays test voltage
Auto HOLD of test readings
Automatic discharge of circuit under test
Live circuit audible and visible warning
Press to test or latching test button mode to give a permanent output on insulation test
Automatic zero adjust removes the resistance of the test leads
Complies with BS EN 61557 (17th Edition) UK and international standards
Complies with EN61010 CAT III 600V
200mA continuity test current with buzzer below 30Ω
5,000 count backlit digital display with analogue bargraph
Displays test voltage
Auto HOLD of test readings
Automatic discharge of circuit under test
Live circuit audible and visible warning
Press to test or latching test button mode to give a permanent output on insulation test
Automatic zero adjust removes the resistance of the test leads
Complies with BS EN 61557 (17th Edition) UK and international standards
Complies with EN61010 CAT III 600V
Supplied with
6 AA alkaline batteries, instructions, carry case, test leads and crocodile clips.
Specifikationer
Attribute | Value |
---|---|
Model Number p | IN2102 |
Tester Type | Insulation & Continuity Tester |
Maximum Test Voltage | 1000V |
Minimum Test Voltage | 250V |
Maximum Insulation Resistance Measurement | 5000MΩ |
Display Type | LCD |
Calibrated | UKAS |
Test Current | 200mA |
Power Source | Battery |
Battery Type | AA |
Minimum Operating Temperature | 0°C |
Maximum Operating Temperature | +40°C |
Safety Category Voltage | 600V |
Safety Category Level | CAT III |
Safety Category | CAT III 600V |
Length | 90mm |
Height | 54mm |
Width | 210mm |
Dimensions | 90 x 210 x 54mm |