- RS-artikelnummer:
- 124-5480
- Tillv. art.nr:
- 2305
- Tillverkare / varumärke:
- ADAFRUIT INDUSTRIES
Tillfälligt slut i lager – restorder för leverans 2024-05-22
Lagt till varukorgen
Pris (ex. moms) Varje
108,02 kr
(exkl. moms)
135,02 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 108,02 kr |
5 - 9 | 96,55 kr |
10 + | 86,44 kr |
- RS-artikelnummer:
- 124-5480
- Tillv. art.nr:
- 2305
- Tillverkare / varumärke:
- ADAFRUIT INDUSTRIES
Lagstiftning och ursprungsland
Produktdetaljer
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Board dimensions: 18 x 17 x 2 mm (0.7" x 0.7" x 0.1")
1.0 g
1.0 g
Motor Controllers & Drivers
Specifikationer
Attribute | Value |
---|---|
For Use With | Haptic Motor |
Kit Classification | Development Board |
Featured Device | DRV2605L |
Kit Name | Controller Board |
- RS-artikelnummer:
- 124-5480
- Tillv. art.nr:
- 2305
- Tillverkare / varumärke:
- ADAFRUIT INDUSTRIES