Honeywell Flange Mount Hall Effect Sensor, CMOS Output, 4.5 → 18 V dc, Barrel Body, 2 mm
- RS-artikelnummer:
- 822-3747
- Tillv. art.nr:
- SNDH-T4C-G01
- Tillverkare / varumärke:
- Honeywell
Denna produkt har utgått
- RS-artikelnummer:
- 822-3747
- Tillv. art.nr:
- SNDH-T4C-G01
- Tillverkare / varumärke:
- Honeywell
Datablad
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- US
Produktdetaljer
Honeywell Hall Effect Sensors
The Honeywell SNDH-H Series Hall-Effect Speed Sensors use a magnetically biased Hall-effect integrated circuit to accurately sense movement of ferrous metal targets.
The Optimum performance is dependent upon variables which must be considered in combination: target material, geometry
and speed, sensor/target gap, and environmental temperature.
All models are highly reliable and provide completely quality.
The Optimum performance is dependent upon variables which must be considered in combination: target material, geometry
and speed, sensor/target gap, and environmental temperature.
All models are highly reliable and provide completely quality.
Please ensure the sensor is mounted so that the center of the sensor face is over the center of the gear teeth or target.
Ensure the mounted sensor is stable and vibration free.
Ensure the mounted sensor is stable and vibration free.
Specifikationer
Attribute | Value |
|---|---|
| Output Type | CMOS |
| Body Style | Barrel |
| Mounting Style | Flange Mount |
| Supply Voltage | 4.5 → 18 V dc |
| Terminal Type | Connector |
| Detection Range | 2 mm |
| Switching Current | 20 mA |
| Switching Frequency | 1 Hz → 15 kHz |
| Length | 68.8mm |
| Width | 15mm |
| Dimensions | 15 x 68.8 mm |
| Maximum Operating Temperature | +150°C |
| Minimum Operating Temperature | -40°C |
| Reverse Polarity Protection | Yes |
| Short Circuit Overload Protection | Yes |