Microchip KSZ8061RNBW, Ethernet Transceiver, 10Mbps, 3.3 V, 32-Pin QFN
- RS-artikelnummer:
- 122-4832
- Tillv. art.nr:
- KSZ8061RNBW
- Tillverkare / varumärke:
- Microchip
Tillfälligt slut i lager – restorder för leverans när den finns i lager
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 4)
26,255 kr
(exkl. moms)
32,819 kr
(inkl. moms)
| Enheter | Per unit | Per Pack* |
| 4 - 16 | 26,255 kr | 105,02 kr |
| 20 - 44 | 24,205 kr | 96,82 kr |
| 48 - 196 | 23,483 kr | 93,932 kr |
| 200 + | 22,985 kr | 91,94 kr |
- RS-artikelnummer:
- 122-4832
- Tillv. art.nr:
- KSZ8061RNBW
- Tillverkare / varumärke:
- Microchip
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
KSZ8061R 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Specifikationer
Attribute | Value |
|---|---|
| IC Type | Transceiver IC |
| Data Rate | 10 Mbps, 100Mbps |
| Number of Transceivers | 1 |
| Standard Supported | IEEE 802.3az |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 32 |
| Typical Operating Supply Voltage | 3.3 V |
| Dimensions | 5 x 5 x 0.95mm |
| Maximum Operating Temperature | +105 °C |
| Minimum Operating Temperature | -40 °C |