Phoenix Contact UK 5-HESI Series Black Fused DIN Rail Terminal, 1mm², Single-Level, Screw Termination, Fused, ATEX
- RS-artikelnummer:
- 463-3862
- Tillv. art.nr:
- 3004100
- Tillverkare / varumärke:
- Phoenix Contact
355 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 5)
99,646 kr
(exkl. moms)
124,558 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
5 + | 99,646 kr | 498,23 kr |
- RS-artikelnummer:
- 463-3862
- Tillv. art.nr:
- 3004100
- Tillverkare / varumärke:
- Phoenix Contact
Lagstiftning och ursprungsland
- COO (Country of Origin):
- TR
Produktdetaljer
Phoenix Contact, Fused DIN Rail Terminals
The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the part.
Features and Benefits
Large-surface labeling
Safety lever locked in end position
Hinged disconnect lever
Flip-open compartment to accommodate a fuse
Options to accommodate 5x20mm and 6.3x32mm fuses
Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)
Safety lever locked in end position
Hinged disconnect lever
Flip-open compartment to accommodate a fuse
Options to accommodate 5x20mm and 6.3x32mm fuses
Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)
Typical Applications
Protecting critical sensor or relay equipment
Note
Parameters in tech. spec. table are with respect to UL and CSA Approvals. With UL approval these products have a nominal rating of 10A @ 600V; with CSA approval they have a nominal rating of 25A @ 600V
Approvals
UL recognised component, CSA certified
Phoenix Contact Fused Terminal Block, 5mm Fuse, 6.3A - UK 5-HESI - 3004100
This terminal block from Phoenix Contact is a fuse carrier as well as a potential distributor. It allows for the user-friendly testing of a fuse and plays a vital role in protecting devices, such as relays, from over current and short circuits.
The device is quick to install as you can easily snap it onto a DIN rail without any tools. Its universal screw connectors permit multi-conductor connections that remove the need for re-tightening screws and prevent wires from being accidentally disengaged. For your convenience, a flip-open compartment makes it easy to install a fuse. The unit's rugged polyamide body stands up extremely well to hostile conditions and heavy-duty wear and tear.
The terminal block is compatible with conductors ranging in size from 26AWG to 10AWG (American Wire Gauge). It's easily mounted into a control cabinet and is useful in power and energy management applications.
The device is quick to install as you can easily snap it onto a DIN rail without any tools. Its universal screw connectors permit multi-conductor connections that remove the need for re-tightening screws and prevent wires from being accidentally disengaged. For your convenience, a flip-open compartment makes it easy to install a fuse. The unit's rugged polyamide body stands up extremely well to hostile conditions and heavy-duty wear and tear.
The terminal block is compatible with conductors ranging in size from 26AWG to 10AWG (American Wire Gauge). It's easily mounted into a control cabinet and is useful in power and energy management applications.
• Certified as safe to use in hazardous areas where explosive atmospheres may be present
• Operating temperature range of -60°C to +125°C
• Conforms to the RoHS (Restriction of Hazardous Substances) directive, meaning it contains no more than minimal levels of hazardous substances
• Meets the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards, so it won't damage equipment via electrostatic discharge
• Operating temperature range of -60°C to +125°C
• Conforms to the RoHS (Restriction of Hazardous Substances) directive, meaning it contains no more than minimal levels of hazardous substances
• Meets the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards, so it won't damage equipment via electrostatic discharge
Specifikationer
Attribute | Value |
---|---|
Colour | Black |
Number of Levels | Single |
American Wire Gauge | 26 → 10AWG |
Series | UK 5-HESI |
Termination Method | Screw |
Cable CSA | 1mm² |
Fused | Yes |
Current Rating | 6.3A |
Voltage Rating | 500 V |
Pitch | 8.2mm |
Minimum Operating Temperature | +105°C |
Maximum Operating Temperature | -60°C |
Hazardous Area Certification | ATEX |
Standards Met | IEC 60947-7-3, IEC 60947-7-3 |
Model Number | UK 5-HESI |